Abstract:For the numerical simulation of underwater wet flux-cored arc welding, the most crucial issue is to investigate the intense interactions between the underwater bubble, arc plasma, and molten metal. However, it is a great challenge to couple them into a single numerical model. In this study, a 3D three-phase flow model is originally established, which successfully couples the dynamic bubble, arc, and droplet. A modified Lee model is employed to realize spontaneous phase transition from liquid water to bubble gas. According to the simulation results, the bubble evolution is divided into four main stages, and two bubble separation modes are recognized. It is found that, both the changing pressure field around the bubble and the varying flow direction of surrounding water contribute to the unique bubble evolution patterns. As for the droplet, its violent up-and-down oscillation at the wire tip is mainly caused by the opposite gas drag forces, which are produced by the turbulent gas flow inside the bubbles. The upward gas drag force can even make the neck of the droplet disappear. With different droplet detaching angles, two predominant droplet transfer modes are numerically produced; when the angle reaches 147°, the droplet is pushed away and becomes a spatter. Furthermore, the underwater arc is found to be subjected to compressions from both the radial direction due to bubble necking and the axial direction due to droplet growth. The arc temperature and velocity vary significantly not only during the whole droplet transfer period, but also within each bubble evolution cycle. To verify the reliability of the model, underwater welding experiments and visual sensing are conducted. The simulated results match well with the experimental ones, with an 8% error in the droplet transfer period and only a 1.4% error in the bubble evolution cycle.

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Molten Droplet Size Control in Short-Circuiting CO2 Arc Welding

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Detect and Analysis of Molten Droplet in Short-Circuit Arc Welding Based on High-Speed Charge Coupled Device Camera

Analysis and control of short-circuit experience in short-circuit CO2 welding

Real-Time Detection and Control of Torch-Height in Waveform Controlled Short-Circuit CO2 Arc Welding

Random Nature of Droplet Size and Its Origins in Short Circuit Co2 Arc Welding

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

Analysis of Controlled Driving and Spreading Behavior of Molten Pool in Cold Metal Transfer

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Simulation and control of metal droplet transfer in bypass coupling wire arc additive manufacturing

Microstructure and Mechanical Properties of a Weld Seam from Magnetron High-Current CO2 Welding

Fuzzy Adjustment of Arc Current in Short-Circuiting CO2 Welding

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Wave controlling method for CO2 welding using saturable inductor

Current status of research on numerical simulation of droplet transfer in CO2 gas–shielded welding

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Modeling of droplet short-circuiting transfer and simulation of three-dimensional transient behavior of molten pool

Modeling the coupled bubble-arc-droplet evolution in underwater flux-cored arc welding

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Influence of Interwire Distance and Arc Length on Welding Process and Defect Formation Mechanism in Double-Wire Pulsed Narrow-Gap Gas Metal Arc Welding