Abstract:Theoretically, the cross coupled arc (CCA) welding process holds the potential for decoupling heat and mass transfer during welding, allowing for independent control. However, conventional CCA processes typically utilize low-frequency alternating current (AC) as input heat sources for the bypass arc, which can lead to oscillation of the main arc due to changes in polarity of the bypass arc. This arc oscillation can result in uneven heat distribution among arcs, consequently affecting the decoupling effect on heat and mass transfer. When applied in additive manufacturing, it may cause issues such as uncontrollable droplet placement and reduced molding accuracy. To reduce the main arc oscillation, this study presents a designed and developed CCA welding heat source using a high-frequency AC square wave with an output frequency up to 20 kHz for input of bypass arc. Through analyses and experimental verification, it has been demonstrated that increasing the variable polarity frequency effectively suppresses the main arc oscillation, achieves control over the melting rate of the filled welding wire within the CCA, and enables decoupled heat transfer between the workpieces' input energy. Furthermore, after suppressing main arc oscillation, it operates with high-frequency vibrations at small amplitudes expected to induce stirring effects on molten pools, promoting dendrite fragmentation and weld grain refinement, which has important potential application and research value.

Fuzzy Adjustment of Arc Current in Short-Circuiting CO2 Welding

Real-Time Detection and Control of Torch-Height in Waveform Controlled Short-Circuit CO2 Arc Welding

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Analysis and control of short-circuit experience in short-circuit CO2 welding

Molten Droplet Size Control in Short-Circuiting CO2 Arc Welding

Wave controlling method for CO2 welding using saturable inductor

Arc force self-adapt control system of invert arc welding machine

Adaptive Real-Time Predictive Compensation Control For 6-Dof Serial Arc Welding Manipulator

Welding Fuzzy Control System Based on Real-Time Measurements of the Temperature Field

Study on self-optimizing function for intelligent control of CO2 welding

Stability Analysis and Control of Welding Current for Automatic Rail Narrow-gap Arc Welding System

Welding Process Carbon Footprint Analysisand Process Parameters Optimization

Study on three-dimensional output characteristic control for welding arc

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Automatic underwater arc welding seam-tracking system based on flux-core wire and rotating arc sensor

New method of signal processing for weld tracking system of submerged arc welding

Research on suppression of cross coupled arc oscillation behavior

Intelligent Control for the Correction of Welding Path Deviation on Welding Robot with Rotating Arc Sensor

Welding Currents Filtering of Compulsively Short Circuiting Transfer in Rotational Arc MAG Welding

Development of an automatic arc welding system using an adaptive sliding mode control

Real-time Control System of Torch-height Based on Through-the-wire Sensor