Abstract:Consistent joint penetration is essential to mechanical properties of weldments, yet difficult to realize in gas tungsten arc welding due to heat accumulation, varying welding conditions, and uncertain disturbance, especially for manufacturing large-scale structural components. The solution is to monitor welding penetration in real-time and implement closed-loop control. In this paper a directional light-assisted vision sensing scheme is proposed to measure the transient profile of the backside weld pool/bead for monitoring and further controlling the joint penetration state. The developing zone and the developed zone of the backside weld bead are recognized, helping determining its final width. And the relationship between the transient backside bead width and the corresponding final width is established. Furthermore, the backside bead profile is employed as a feedback signal and the closed-loop control of weld formation is implemented to achieve full penetration and a constant backside bead width. A multiple-input single-output model predictive controller is utilized in the control system, creatively combined with an anti-windup integrator eliminating the steady-state error caused by nonlinearity in welding. Experimental results have proved that the developed control system is effective in keeping a consistent backside bead width with a rapid response, a small overshoot and robustness against varying heat transfer conditions.

Real-Time Detection and Control of Torch-Height in Waveform Controlled Short-Circuit CO2 Arc Welding

Real-time Control System of Torch-height Based on Through-the-wire Sensor

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Detection of the contact tube to working distance in wire and arc additive manufacturing

Track Control in Automated Welding of Saddle Curve

Fuzzy Adjustment of Arc Current in Short-Circuiting CO2 Welding

Realizing precision pulse TIG welding with arc length control and visual image sensing based weld detection

Welding Fuzzy Control System Based on Real-Time Measurements of the Temperature Field

Automatic Offset Correction System of Narrow Gap Arc Welding Torch for Rail

Analysis and control of short-circuit experience in short-circuit CO2 welding

Stability Analysis and Control of Welding Current for Automatic Rail Narrow-gap Arc Welding System

Development of in-process welding torch position control system using AI technology

Molten Droplet Size Control in Short-Circuiting CO2 Arc Welding

Design of an Automatic Control System for Magnetic Controlled Narrow-Gap TIG Arc Welding of Thick Plates

Automatic weld seam tracking of tube-to-tubesheet TIG welding robot with multiple sensors

Research on Arc Length Tracking Control Technology of Tube-Sheet Welding Based on Pulsed TIG

Vision Sensing and Feedback Control of Weld Penetration in Helium Arc Welding Process

Arc force self-adapt control system of invert arc welding machine

Real-time monitoring and control of porosity defects during arc welding of aluminum alloys

Electric Arc Length Control of Circular Seam in Welding Robot Based on Arc Voltage Sensing

Passive Vision Detection of Torch Pose in Swing Arc Narrow Gap Welding