Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Effects of Arc Length Adjustment on Weld Bead Formation and Droplet Transfer in Pulsed GMAW Based on Datum Current Time

Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field

Numerical Analysis of Arc Driving Forces and Temperature Distribution in Pulsed TIG Welding

Numerical simulation of arc, metal transfer and its impingement on weld pool in variable polarity gas metal arc welding

Comparative Study of Droplet Transfer Modes on Appearance, Microstructure, and Mechanical Properties of Weld During Pulsed GMAW

A theoretical study of a gas metal arc welding system

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Effects of Welding Speed and Pulse Frequency on Surface Depression in Variable Polarity Gas Tungsten Arc Welding of Aluminum Alloy

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding

An investigation of metal transfer process in GMAW

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Thermodynamic Insights into the Influence of Welding Current on Oxygen Levels in the Submerged Arc Welding Process

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints