Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Study on the Molten Pool Fluid Behavior of PAW-Cable-Type Seven-Wire GMAW Hybrid Welding

Weld Pool Flow Characteristics in Double-Wire Arc Welding of Aluminum Alloys: Research by Numerical Simulations

The wetting and stirring behavior of molten pool in narrow gap AMF-GTAW by numerical and experimental analysis

Temperature Field and Flow Field of Molten Pool in SRA EGW

Research on the sidewall penetration mechanisms of cable-type welding wire narrow gap GMAW process

Numerical simulation of the molten pool character in high power fiber laser welding

Numerical simulation and experiment for the dynamic behavior of molten pool in ultrasonic-assisted MIG welding

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Numerical Simulation on Flow and Heat Transfer in Weld Pool of Laser-Plasma Hybrid Welding

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding

Numerical simulation of GTAW for ZW61 magnesium alloy thin plates: Coupling the finite element method with the cellular automata method

Numerical simulation of WAAM process by a GMAW weld pool model

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

Numerical simulation of arc, metal transfer and its impingement on weld pool in variable polarity gas metal arc welding

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Numerical Analysis of Molten Pool Dynamic Behaviors during High-Speed Oscillation Laser Welding with Aluminum Alloy

Numerical simulation of weld pool formation in submerged arc welding process

Three-Dimensional Numerical Simulation on the Flow and Heat Transfer in the Welding Pool of Laser-Plasma Hybrid Welding