Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Temperature Field and Flow Field of Molten Pool in SRA EGW

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

The wetting and stirring behavior of molten pool in narrow gap AMF-GTAW by numerical and experimental analysis

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Temperature Simulation of Aluminium Alloy Double-Arc Welding Process on Simplified Conditions

Weld Pool Flow Characteristics in Double-Wire Arc Welding of Aluminum Alloys: Research by Numerical Simulations

Numerical Analysis of Arc Driving Forces and Temperature Distribution in Pulsed TIG Welding

Study on the Molten Pool Fluid Behavior of PAW-Cable-Type Seven-Wire GMAW Hybrid Welding

Simulation of Temperature Field in FSW of 6061T6 Aluminum Alloy IGBT Liquid Cooled Radiator Panel

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Numerical Analysis of Molten Pool Dynamic Behaviors during High-Speed Oscillation Laser Welding with Aluminum Alloy

Numerical simulation of weld pool formation in submerged arc welding process

Numerical Simulation on Flow and Heat Transfer in Weld Pool of Laser-Plasma Hybrid Welding

Modeling of Temperature Field and Pool Formation During Linear Laser Welding of DP1000 Steel

The effects of process parameters on melt-pool oscillatory behaviour in gas tungsten arc welding

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Numerical Simulation of Electromagnetic Field and Temperature Field of ESR

Numerical simulation and experiment for the dynamic behavior of molten pool in ultrasonic-assisted MIG welding

NUMERICAL SIMULATIONS OF ELECTRO-SLAG REMELTING PROCESS

Direct observation and numerical simulation of molten metal and molten slag behavior in electroslag welding process