Abstract:Abstract Online monitoring of the welding process is very important to the development of the modern manufacturing industry. However, monitoring welding defects in real-time and with high accuracy is challenging because welding is inherently a dynamic, non-linear process. In this paper, the forming defects generated during the melt Inert-gas welding of sheet steel as the object of research. We propose a multi-task simultaneous monitoring system for welding defects based on the YOLOv5 model, which can achieve highly accurate simultaneous detection of burn-through and weld deviation defects. Firstly, a passive vision system has been designed that can filter out strong arc light interference. In combination with a self-made camera bracket with flexible adjustment and repeatable positioning, clear images of the molten pool can be acquired. Compared to common methods that require a laser for weld deviation detection, all monitoring tasks can be performed with just one charge coupled device camera, significantly reducing the cost of deploying the system. Secondly, to obtain experimental data closer to the industrial field environment. We simulated different degrees of local and continuous burn-through by changing three parameters: welding current, plate thickness, and lap width. Four different deviations: left, right, and tilt were designed to obtain rich weld deviation image data. Finally, based on the above data, we compared several aspects such as detection speed, recognition accuracy, and loss function. The YOLOv5s model with the smallest model parameters was finally selected as the base model. The results show that our proposed multi-task simultaneous monitoring system achieves an average accuracy of 98.84% for the identification of four molten pool states. Burn-through defect and weld deviation detection with more than 50 frames per second can be achieved in the online detection state. This paper can provide some guidance for the online monitoring of the welding manufacturing process.

Detection of Backside Width of Molten Pool in Laser-MIG Hybrid Welding

Vision sensing system and detection of backside image of molten pool in laser-MIG hybrid welding

Vision System for Closed-Loop Control of the Penetration in Laser-Mig Hybrid Welding

Study on the Method of Vision Detection on Penetration Status in Laser-MIG Hybrid Welding

Prediction of weld back width based on top vision sensing during laser-MIG hybrid welding

Criterion for Online Evaluation of Penetration Status in Laser-Mig Hybrid Welding and Its Application

Evaluation Criterion and Closed-Loop Control of Penetration Status During Laser-Mig Hybrid Welding

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

A Precise Visual Method For Narrow Butt Detection In Specular Reflection Workpiece Welding

TIG Stainless Steel Molten Pool Contour Detection and Weld Width Prediction Based on Res-Seg

Closed-loop Control of Medium-Thickness Plate Arc Welding Based on Weld-Face Vision Sensing

Online identification of burn-through and weld deviation in sheet lap MIG welding based on YOLOv5

Penetration Control of GTAW Process for Aluminum Alloy Using Vision Sensing

A Vision Based Method for Humping Detection in High-Speed Laser Welding

Investigation into keyhole-weld pool dynamic behaviors based on HDR vision sensing of real-time K-TIG welding process through a steel/glass sandwich

Sensing and Control of Weld Pool Geometry for Automated GTA Welding

Vision Sensing and Feedback Control of Weld Penetration in Helium Arc Welding Process

In-Process Monitoring of Lack of Fusion in Ultra-Thin Sheets Edge Welding Using Machine Vision

Real-time monitoring of weld surface morphology with lightweight semantic segmentation model improved by attention mechanism during laser keyhole welding

Real-time detection and localization method for weld seam of narrow butt joint based on semantic segmentation

A Novel Visual Image Sensor for CO2short Circuiting Arc Welding and Its Application in Weld Reinforcement Detection