Abstract:Over the last few decades, the demand for lightweight constructions has been increased continuously for several industrial applications, like automotive and ship building, to reduce the weight of vessels in order to minimize the CO2 emissions as a result of a lower fuel consumption. Lightweight construction is almost applied for ship applications, especially for yachts, which are designed by using aluminum for the deck constructions and steel for the ship hull. For joining these parts, a high-power laser welding process shall be developed. However, the welding of these dissimilar materials is associated with great challenges, due to the different physical properties and the formation of hard and brittle intermetallic phases, which may influence negatively the properties of the weld seam. The quality of dissimilar joints depends strongly on the mixture ratio between the molten amount of steel and aluminum. However, the mixture ratio varies over the weld seam length due to a high dynamic of the keyhole resulted by welding of this material combination. Furthermore, different batches of materials and varied sheet thicknesses t may influence the mixture ratio. In this study, a high-power laser welding process is developed with in-process control of the penetration depth tP by analyzing the spectral process emissions for dissimilar lap joints of aluminum alloy EN AW-6082 (t = 8 mm) and steel S355 (t = 5–7 mm). In the context of these investigations, an increase of occurring cracks within the weld seam and ejections of molten material with increasing penetration depth tP can be observed. To achieve a relative high joint strength, the penetration depth tP must be kept constant at a value of 1.4 mm. In case of varied batch of material, thickness t of the used sheets, welding speed vS, and leap of the steel sheet thickness t, the penetration depth tP requested cannot be achieved. Using the in-process control of the penetration depth tP, the weld seam quality remains almost constantly over the weld seam length, as shown in visual inspections, metallographic analyses, profiles of the penetration depth tP, and tensile shear testing. Among other things, the appearance of ejections of molten material can be avoided by using the in-process control of the penetration depth tP.

Novel approach for weld depth determination using optical coherence tomography measurement in laser deep penetration welding of aluminum and steel

An Efficient Method for Laser Welding Depth Determination Using Optical Coherence Tomography

Keyhole mapping to enable closed-loop weld penetration depth control for remote laser welding of aluminum components using optical coherence tomography

Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding

Welding depth measurement for different mode lasers using optical coherence tomography

Potentials of Optical Coherence Tomography for Process Monitoring in Laser Welding of Hairpin Windings

Optical Coherence Tomography for 3D Weld Seam Localization in Absorber-Free Laser Transmission Welding

Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints

Optical coherence measurement-based penetration depth monitoring of stainless steel sheets in laser lap welding using long short-term memory network

Weld Classification With Feature Extraction by FRESH Algorithm Based on Surface Topographical Optical Coherence Tomography Data for Laser Welding of Copper

Non-Destructive Identification of Weld-Boundary and Porosity Formation During Laser Transmission Welding by Using Optical Coherence Tomography

A Novel Approach to the Holistic 3D Characterization of Weld Seams-Paving the Way for Deep Learning-Based Process Monitoring

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Approach for advanced working distance monitoring and control capability in laser metal deposition processing for additive manufacturing

DBN-based online identification of porosity regions during laser welding of aluminum alloys using coherent optical diagnosis

Detection technique for transition between deep penetration mode and shallow penetration mode in CO2 laser welding of metals

Data-driven analysis of surface roughness influence on weld quality and defect formation in laser welding of Cu–Al

Controlling the weld penetration depth of laser beam micro welding by using an iterative learning approachSteuerung der Einschweißtiefe beim Laserstrahl‐Mikroschweißen mit Hilfe eines iterativen Lernansatzes

The Use of Thermal Data for Quality Assurance in the Process of Continuous Ultrasonic Welding of Thermoplastic Composite Materials

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Mechanisms of Increasing Weld Depth during Temporal Power Modulation in High‐Power Laser Beam Welding