Abstract:By generating a complementary effect of each weld in the welding process, a hybrid welding can improve the welding efficiency while ensuring the welding quality. The combination of plasma arc welding (PAW) with high current density and metal inert gas (MIG) welding utilizing consumable electrodes is available to perform one-pass welding for the thick plate. The plasma torch works for keyhole welding with deep penetration, and the MIG torch works for a build-up welding to form a surface bead. However, due to the complexity and particularity of the two-electrode system, it is still difficult to achieve a high-quality automatic welding. In this study, the authors have observed the weld zone with a complementary metal oxide semiconductor (CMOS) camera, and analyzed the regulation of image features changing with the torch position. Control strategy of the welding torch and image processing to realize the seam tracking and standoff have been proposed. Utilizing a high-speed video camera, system configuration and welding conditions have been determined with the welding images of the arc behavior and droplet transfer. The authors have investigated the corresponding welding conditions when the welding defects occurred. In addition, we have modified the power source with an invertor control and designed a characteristic curve for the power source to stabilize welding conditions and enhance the MIG arc length self-regulation. The performance of welding system for the seam tracking and standoff control is effective in the real-time welding experiment. The power source with an invertor control and the designed characteristic curve can optimize the welding conditions and acquire good welding results. The study has achieved a high-quality welding under the condition of automatic plasma MIG welding.

Development of the Plasma Detecting System in CO 2 Laser Welding

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Design of multi-sensor on-line monitoring system for laser welding

Plasma light emission monitoring and penetration status recognition in CO2 laser welding of AZ31B wrought magnesium alloy - art. no. 682502

Coaxial Monitoring of Penetration in CO2 Laser Welding

Laser-induced Plasma Control in CO 2 Laser Welding

Plasma Behavior and Control with Small Diameter Assisting Gas Nozzle During Co2 Laser Welding

Double Closed-Loop Control of the Focal Point Position in Laser Beam Welding

Stability Information in Plasma Image of High-Power CO2 Laser Welding

Monitoring of deviation status of incident laser beam during CO 2 laser welding processes for I-core sandwich construction

Defect detection during laser welding using electrical signals and high-speed photography

Detection of laser-induced plasma for high-power laser beam welding

[Study of the Laser Absorption Characteristics of CO(2), Laser-Pulsed GMAW Hybrid Welding Based on Spectral Diagnosis Technique].

Characteristic Analysis on Laser Induced Plasma of Different Penetration Condition in High Power CO2 Laser Welding

Study of plasma control in high-power CO2 laser welding

Monitoring and detecting of defects during fiber laser welding

Visual Sensing and Quality Control in Plasma MIG Welding

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

Behavior of the Plasma Characteristic and Droplet Transfer in CO2 Laser–gmaw-P Hybrid Welding

Research on plasma in high power carbon dioxide laser welding of ship plate