Abstract:There is growing concern regarding air pollutants (NOx, SOx, and PM) and carbon emissions from ocean-going vessels in harbor areas and the role of high-voltage shore connection (HVSC) systems in mitigating these emissions during vessel berthing. The HVSC operates as a TN grounding system in humid environments, and it needs a proper grounding design to ensure safety when faults occur. This article intends to examine the overvoltage resulting from fault currents and its implications for the safety of operators when a single line-to-ground fault takes place within the design of HVSC grounding systems. The assessment is carried out by employing actual scenarios and parameters from a container berth at Kaohsiung Harbor in Taiwan. Considering site conditions, such as the wet ground surface, human body resistance, and electric shock duration, the tolerable safe voltage level is derived using IEEE Std. 80 and IEC 60479-1. Based on the shore power system grounding architecture specified in IEEE/IEC 80005-1, an equivalent circuit model is constructed to calculate the fault currents using symmetrical component analysis. The actual touch voltages generated in various locations are analyzed under scenarios of connecting or disconnecting the equipotential bonding between the ship and the shore using neutral grounding resistor (NGR) designs. This article delves into the scenarios of electric shock that may occur during the operation of an actual container ship's shore power system. It evaluates whether various contact voltage values exceed current international standards and verifies the grounding design and safety voltage specifications of IEEE/IEC 80005-1. According to the results of this study, the use of NGR and protective earthed neutral (PEN) conductors in HVSC is crucial. This can limit fault currents, reduce touch voltage, and ensure the safety of personnel and equipment. Therefore, ensuring and monitoring equipment conductors and adopting NGRs of appropriate sizes are crucial elements in maintaining electrical safety in HVSC systems.

What problem does this paper attempt to address?

### Problems Addressed by the Paper The paper primarily explores the safety grounding design issues of High Voltage Shore Connection (HVSC) systems during ship berthing. Specifically, the paper focuses on the following aspects: 1. **Impact of Fault Current**: - When a single-phase ground fault occurs, the overvoltage in the HVSC system can pose safety hazards to operators. The paper evaluates this overvoltage and its impact on operator safety through real scenarios and parameters. 2. **Safety Voltage Standards**: - Based on IEEE Std. 80 and IEC 60479-1 standards, considering factors such as humid environments, human body resistance, and duration of electric shock, the paper derives acceptable safety voltage levels. 3. **Design of Equipotential Bonding**: - Constructing an equivalent circuit model to calculate fault current based on the grounding architecture of shore power systems specified in IEEE/IEC 80005-1 standards, the paper analyzes the contact voltage generated when the equipotential bonding between the ship and shore is connected or disconnected under different conditions. 4. **Role of Neutral Grounding Resistor (NGR)**: - The study finds that using a Neutral Grounding Resistor (NGR) and Protective Earth Neutral (PEN) conductor can limit fault current, reduce contact voltage, and ensure the safety of personnel and equipment. Through the above research, the paper aims to validate the grounding design and safety voltage specifications in IEEE/IEC 80005-1 standards and propose key measures to ensure electrical safety.

Assessing High-Voltage Shore Connection Safety: An In-Depth Study of Grounding Practices in Shore Power Systems

High Voltage Shore Connection Systems: Grounding Resistance Selection and Short Circuit Currents Evaluation

A Comprehensive Exploration of IEC/IEEE 80005-1 Standards and the Guidelines of Ship Classification Societies

Performance of Different Grounding Systems of 500 Kv XLPE Long Submarine Cables Based on Improved Multiconductor Analysis Method

Grounding Methods of Multi-Terminal VSC-HVDC System Based on Modular Multi-level Converter

Grounding System Analysis of 220 Kv Power Cable Lines Installed Underneath a Bridge

Mechanism Research of High Resistance Grounding for Shipboard Medium Voltage Power Grid

Research on Flexible Medium-voltage DC Distribution Technology Based Shore-to-ship Power Supply System

Measurement and Safety Criteria of Step Voltage of High Voltage Direct Current Grounding Electrode

International Standardization in the Design of “Shore to Ship” - Power Supply Systems of Ships in Port

The Design and Simulation of Associated Protection for Low Voltage Shore-to-ship Power Supply System in Inland Port

Research on transient overvoltage for converter station of Zhoushan multi-terminal VSC-HVDC project

Technical design aspects of harbour area grid for shore to ship power: State of the art and future solutions

Research on Single-Phase Grounding Fault Protection on the AC Side of VSC-HVDC Systems Considering Third Harmonic Modulation

Analysis on Overvoltage in Renovated Control and Protection System for HVDC Power Transmission Project from Tianshengqiao to Guangzhou

A novel high‐impedance neutral grounding method for medium‐ or large‐size hydroelectric generators

Mechanism study of resonant neutral grounding scheme for shipboard medium voltage power grid

Ground-Fault Recognition in Low-Voltage Ships Based on Variation Analysis of Phase-to-Ground Voltage and Neutral-Point Voltage

Single-phase grounding overvoltage of long-distance UHVAC lines

Design and Surface Flashover Test of 10 kV SiC Power Module for DC Shipboard Application

Research on Grounding Fault Protection for Shipboard Medium Voltage DC System