Abstract:Surface modification, sputtering erosion and deuterium (D) retention were investigated of tungsten (W) and W-1 wt.% La2O3 (WL10) that were exposed to pure D plasma and D plasma with different impurities (He, N2, Ar). After the plasma exposure, the surface of WL10 is covered by blisters with various shapes, and their size and density increase with D fluence. When the fluence was higher than 8.6 x 1024 D m-2, the blister rupturing occurred causing a partially-and/or fully-opened lid features. The phase interface between La2O3 grains and W matrix was served as the nucleation sites for blistering and large-scale crack propagation near the surface. Small blisters were preferentially appeared on the grains with surface orientation of nearly (111) and that originated from the intra-granular crack at depths much closer to the sample surface. Micro-sized pits were formed on the WL10 surface after exposure to high fluence plasma, which was due to a higher sputtering rate of La2O3 grains during plasma exposure. For both materials, seeding He in D plasma can effectively inhibit the blister formation, and most serious blistering occurs with N seeding in D plasma. When exposed to Ar + D plasma, sparse small blisters were visible and most of blisters were ruptured for W, whereas there are some big blisters with long strip shape for WL10. The difference in blistering behavior between W and WL10 was attributed to the differences in microstructure, composition as well as ductility due to the presence of La2O3 phases. The sputtering yields increased slightly with He seeding in D plasma. N2 and Ar seeding in D plasma leaded to a significant increase in sputtering yields. As compared to the W, the WL10 exhibits a better sputtering erosion resistance in terms of the sputtering yield. The D retention in WL10 increases with D fluence and that was equal to or lower than that in W when exposed to the same conditions.(c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Sputtering yield increase with fluence in low-energy argon plasma-tungsten interaction

The influence of impurities on the erosion of tungsten by low energy high flux deuterium plasma irradiation

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3 Exposed to Deuterium Plasma

Effects of Tantalum Alloying on Surface Morphology and Deuterium Retention in Tungsten Exposed to Deuterium Plasma

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Fuzz Nanostructure and Erosion on Tungsten–vanadium Alloys Exposed to Helium Plasma in the STEP Linear Plasma Device

The effect of Ar+ impurity on W nano-fuzz growth over polycrystalline W targets

High erosion and re-deposition rates of tungsten in the highly collisional plasmas of Magnum-PSI

Erosion and deuterium retention behavior of tungsten exposed to impurity-seeded deuterium plasma

Deuterium Blistering in Tungsten and Tungsten Vanadium Alloys

Influence of impurity gas seeding into deuterium plasma on the surface modification, sputtering erosion and deuterium retention in W and W-La2O3 alloy

Sputtering Properties of RAFM Steels under High-Flux He Plasma Exposure

SPUTTERING RESEARCH OF Al-50wt％Sn ALLOY

Energy losses of highly charged Arq+ ions during grazing incidence on tungsten surfaces

Enhancement of W Nanoparticles Synthesis by Injecting H2 in a Magnetron Sputtering Gas Aggregation Cluster Source Operated in Ar

Surface morphology and deuterium retention in tungsten exposed to high flux D plasma at high temperatures

Erosion of Tungsten-Doped Amorphous Carbon Films in Oxygen Plasma

Effect of Heavy Ion Pre-Irradiation on Blistering and Deuterium Retention in Tungsten Exposed to High-Fluence Deuterium Plasma

Influence of AR injection on shielding layer properties and surface protection from transient high heat loads under the QSPA plasma exposures

Decreased surface blistering and deuterium retention in potassium potassium-doped tungsten exposed to deuterium plasma following ion irradiation