Abstract:Background: Tungsten (W) is a promising candidate for future use in fusion reactors as plasma facing material. During operation it will be exposed to both particle irradiation and high heat flux (HHF) loads. Particle irradiation, especially helium (He), is expected to cause significant surface modifications of W, might leading to performance degradation. The effect of heat loading can accelerate such surface damage. Therefore, the performance of W under the combined action of both heat and particle fluxes has to be investigated in more detail.Purpose:The aim is to investigate the surface modifications of rolled W during exposure to combined heating and He particle flux depending on surface temperature, He flux and fluence.Methods: The He-flux/heating experiments were performed on rolled W samples using the neutral beam HHF test facility GLADIS at IPP Garching, Germany. HHF loads generated with He atoms of 2.4 MW·m?2 and 9.5 MW·m?2 were used. W samples were adiabatically loaded to peak surface temperatures of ~1000 K, ~2000 K and ~3000 K, close to melting. He fluences increased from about 1×1021m?2 to 6×1022 m?2.Results: During He-loading at a low surface temperature (~1000 K), with increasing fluence, defects appeared in grains first, and then blistering was observed on the sample surface, with many ruptured blisters to form lids and grooves. The largest blisters formed on grains with near <001> surface normal. As fluence was increased continuously, small holes were formed on the surface, and the grooves still existed. However, at intermediate surface temperature (~2000 K), with increasing fluence, the damage morphology changed from a porous structure with blisters,via a porous structure with grooves, to a small coral-like structure. At high surface temperature (~3000 K), an evolution from a porous structure to a coral-like structure with increasing fluence was observed, and the coral-like structure changed little as the increasing of fluence continuously. It is shown that the surface modification of rolled W is dependent on a competitive relationship between the formation of blisters and coral-like structures. To study the behaviour of such He damaged surfaces under fusion relevant transient heat loads, 0.9GW·m?2 Edge Localized Modes (ELMs)-like laser thermal shocks were applied. Local melting was observed on the coral-like structure after thermal shocks.Conclusion: The damage morphology of rolled W changes from blisters with a grain orientation dependence to a porous/coral-like structure with increasing temperature, because at high temperatures the Hen and HenVm (He-vacancy) clusters will be broken up and He will diffuse relatively deeply into the W bulk. This transformation of damage morphology can also be induced by the rise of He fluence.

Sputtering Properties of RAFM Steels under High-Flux He Plasma Exposure

Surface Studies on the Characterization of RAFM Steel after Deuterium Plasma Exposure

Influence of Surface Structure on D Retention and Erosion Behaviours of RAFM Steel with D-plasma Exposure

Erosion and fuel retentions of various reduced-activation ferritic martensitic steel grades exposed to deuterium plasma

Irradiation Damage of Reduced Activation Ferritic/martensitic Steel CLAM Exposed to Low-Energy High-Flux D + He Mixture Plasma

Fuzz Nanostructure and Erosion on Tungsten–vanadium Alloys Exposed to Helium Plasma in the STEP Linear Plasma Device

Erosion and Deuterium Retention of CLF-1 Steel Exposed to Deuterium Plasma

Manufacturing of magnetron sputtering tungsten coatings and irradiation damage behavior under helium plasma exposure

Comparison Experiment on the Sputtering of EUROFER, RUSFER and CLAM Steels by Deuterium Ions

The effect of He-induced surface microstructure on D plasma-driven permeation through RAFM steel

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Surface modification of ZrC dispersion-strengthened W under low energy He plasma irradiation

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3exposed to Deuterium Plasma

Effects of Carbon Deposition on Deuterium Plasma-Driven Permeation Through Tungsten-Coated RAFM Steel

Microstructure of Tungsten Coatings Effect on Deuterium Plasma-Driven Permeation Through RAFM Steel

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

High erosion and re-deposition rates of tungsten in the highly collisional plasmas of Magnum-PSI

Helium induced nanoscopic morphology on tungsten under fusion relevant plasma conditions

Erosion dynamics of tungsten fuzz during ELM-like heat loading

Microstructural modification of highly porous resolidified tungsten in heat flux of 46.3 GW/m 2 and focused ion beam

Surface modifications of rolled W during exposure to high heat loads with He