Irradiation Damage of Reduced Activation Ferritic/martensitic Steel CLAM Exposed to Low-Energy High-Flux D + He Mixture Plasma

Yue Xu,Yunfeng Xu,Kai Yang,Laima Luo,Shuyu Dai,Haiying Fu,Yucheng Wu

DOI: https://doi.org/10.1016/j.fusengdes.2022.113015

IF: 1.905

2022-01-01

Fusion Engineering and Design

Abstract:Irradiation damage behavior of reduced activation ferritic/martensitic steel CLAM exposed to D + He mixture plasma was extensively investigated using the linear plasma facility PSIEC at a sample temperature of similar to 800 K with an ion flux of similar to 4.0 x 10(21) m(-2) s(-1), an ion fluence of similar to 7.0 x 10(24) m(-2) and an incident ion energy of similar to 89 eV. Fiber-like nanostructure fuzz was formed on the irradiated CLAM steel surface. D and He bubbles were observed both inside and under the fuzz structure from cross-sectional TEM characterization. Damage level of the steel surface has been found to gradually increase as increasing He concentration in the mixed plasma. The growth process of fuzz can be described as pinholes (which originated from nano-bubbles) to nano-sphere structures, wavy erosion layers, rods, and eventually develops to nano-fuzz. Tungsten enrichment in the near-surface has been determined after plasma exposure due to preferential sputtering of middle-Z elements of iron and chromium. The measured surface tungsten concentration varied from 1.9 to 4.0 wt.%, depending on He concentration in the plasma. Obtained sputtering yield increased as well with increasing He concentration in the mixed plasma.