Abstract:This paper is a continuation study of the residual compressive strength of composite laminates after impact under hygrothermal conditions. Two carbon fibre/epoxy plywood specimens with different lay-ups ([45/-45/0/0/45/0/0/0/90/-45/0]s and [45/-45/0/90/0 /0/0/0/90/0/-45/45]s) were investigated, The materials were subjected to 500 h, 1000 h and 2000 h of service time in a climatic chamber at a temperature of 60 °C and 100% relative humidity, followed by low-velocity post-impact compression using an energy level of 15 J. Experimental and numerical simulations are used to study the residual compressive strength and damage extension of the material. Using the ultrasonic C-scan technique, the internal damage of the specimens was scanned, and the damage evolution in impact and compression tests was analysed. Damage evolution in impact and compression tests was investigated using ultrasonic C-scanning to scan the internal damage of the specimens. The strain change maps of the specimens during compression are studied using the Digital Imaging (DIC) technique. Vumat subroutine coded in Fortran and used in commercial software (ABAQUS) for numerical simulation. To study the effect of damage extension of materials on post-impact and post-impact compression for different hygrothermal times. It was found that the residual compressive strength depended on factors such as the material's hygrothermal time and the initial defects in the plywood; that the 90° and ± 45° fibre orientations played a positive role in the material's hygrothermal; that the hygrothermal made the material's damage more catastrophic; and that the buckling of hygrothermal specimens was not only at the impact position, but was also reflected at the edges. In CAI testing, it was found that the hygrothermally treated specimens were damaged similarly to the desiccation treated specimens, but that compression resulted in a flexural position affected by hygrothermal, which determined the material CAI strength.

Analysis of Residual Post-Impact Compressive Strength of Composite Laminates Under Hygrothermal Conditions

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Experimental and numerical investigation on compression after impact behavior of hygrothermal aged CFRP laminates

Effects of voids on residual tensile strength after impact of hygrothermal conditioned CFRP laminates

Residual bending strength after impact of CFRP laminates in hygrothermal condition

Effect of hygrothermal conditioning on compressive strength after impact in carbon fiber/epoxy composites

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Retained Hygrothermal State Compression Damage Behavior Investigation of Carbon Fiber Reinforced Composites

Post-Damage Compressive Strength of Woven Hybrid Composites Impacted with Various Energy Levels

Numerical Investigation on Behaviors of Composite Laminates with Initial Delamination Defects under Impact and Compression after Impact

Effect of Hygrothermal Aging on Compression Behavior of CFRP Material with Different Layups

Experimental study on the behavior and characterization methods of composite laminates to withstand impact

Compression and hydrothermal ageing after impact of carbon fibre reinforced epoxy laminates

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Qualitative Separation of the Effect of Voids on the Bending Fatigue Performance of Hygrothermal Conditioned Carbon/Epoxy Composites

Qualitative Separation of the Effect of Voids on the Static Mechanical Properties of Hygrothermally Conditioned Carbon/epoxy Composites

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Investigation of the hygrothermal effects on in-plane failure mechanisms of fine Z-pinned laminates

Study on Low-Velocity Impact and Residual Compressive Mechanical Properties of Carbon Fiber-Epoxy Resin Composites

On crashworthiness and energy-absorbing mechanisms of hygrothermal-aged CFRP structures subjected to quasi-static loads