Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

AE feature extraction and signal representation model based on wavelet packet decomposition

A waveform-based clustering and machine learning method for damage mode identification in CFRP laminates

Damage mode identification of adhesive composite joints under hygrothermal environment using acoustic emission and machine learning

Damage modes detection of composite laminates using improved modal strain energy method

Achieving robust damage mode identification of adhesive composite joints for wind turbine blade using acoustic emission and machine learning

Damage Detection of Composite Structures Using Dynamic Analysis

Damage Classification and Evolution in Composite under Low-Velocity Impact Using Acoustic Emission, Machine Learning and Wavelet Packet Decomposition

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Damage Detection For Laminated Composite Structures With Wavelet Analysis

Application of a Priori Knowledge-Enhanced Fuzzy Clustering to Acoustic Emission-Based Damage Identification of Composite Laminates

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Acoustic emission waveforms for damage monitoring in composite materials: Shifting in spectral density, entropy and wavelet packet transform

Delamination analysis of carbon fiber composites under hygrothermal environment using acoustic emission

Characterization of the damage mechanism in CFRP composites under mode I based on comprehensive analysis of AE signals

Cluster Analysis of Acoustic Emission Signals for Tensile Damage Characterization of Quasi-Static Indented Carbon/glass Fiber-Reinforced Hybrid Laminate Composites

Damage Mode Identification of Carbon Fiber/epoxy Composites under Fatigue Process Using Acoustic Emission Monitoring