Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Retained Hygrothermal State Compression Damage Behavior Investigation of Carbon Fiber Reinforced Composites

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

Analysis of Residual Post-Impact Compressive Strength of Composite Laminates Under Hygrothermal Conditions

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

On crashworthiness and energy-absorbing mechanisms of hygrothermal-aged CFRP structures subjected to quasi-static loads

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Hygrothermal Effect on GF/VE and GF/UP Composites: Durability Performance and Laboratory Assessment

Effects of hygrothermal and thermal aging on the low-velocity impact properties of carbon fiber composites

Experimental and numerical investigation on compression after impact behavior of hygrothermal aged CFRP laminates

Vertical compression performance of fiber-reinforced polymer (FRP) foam sandwich composites in hygrothermal environment

Effect of hygrothermal conditioning on compressive strength after impact in carbon fiber/epoxy composites

Initial Damage Induced by Thermal Residual Stress and Microscopic Failure Analysis of Carbon-Fiber Reinforced Composite under Shear Loading

Hygrothermal effects on fatigue delamination behavior in composite laminates

Multiscale modeling of mechanical behaviors of carbon fiber reinforced epoxy composites subjected to hygrothermal aging

Hygrothermal aging mechanism of carbon fiber/epoxy resin composites based on quantitative characterization of interface structure

Effect of Hygrothermal Aging on Compression Behavior of CFRP Material with Different Layups

Hygroscopic phase field fracture modelling of composite materials