Abstract:In order to get a better hygrothermal stress and failure prediction for CFRP laminate, an RVE model was established. Wet and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. A mesoscopic representative volume element (RVE) model of carbon fiber reinforced polymers (CFRP) laminate with 15 plies was established based on the principle of fiber random disturbance. The RVE model was validated by comparing the elastic parameters calculated by the RVE model, Chamis model, and Bridge model. Wet stress and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. Failure process and failure modes of CFRP laminate were discussed based on the multiscale simulation and SEM observations. The results show that the RVE model and the multiscale simulation strategy presented in this work can predict the coupled hygrothermal stress and the strength degradation due to moisture absorption very well. The maximum error between the simulated and experimental averaged force of the moisture‐saturated CFRP laminate subjected to three‐point bending is about 3.4%. Multiscale simulation demonstrated that uneven distribution of fibers can result in the fiber/matrix interfaces bearing a larger transverse stress in the fiber's dense distribution area. It is the main reason that results in fiber/matrix interface failure of CFRP laminates working in hygrothermal environments. Highlights A RVE model of CFRP laminate was presented using fibers random disturbance. Coupled hygrothermal stress of single fiber and surrounded matrix was obtained. A multiscale simulation of the strength change of the CFRP plate due to wet‐thermal stress was conducted. Failure modes of CFRP laminate are discussed based on the multiscale simulation.

Multiscale modeling of mechanical behaviors of carbon fiber reinforced epoxy composites subjected to hygrothermal aging

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Multi-scale Moisture Diffusion Modeling and Analysis of Carbon/kevlar-Fiber Hybrid Composite Laminates under the Hygrothermal Aging Environment

Effect of hygrothermal aging on moisture diffusion and tensile behavior of CFRP composite laminates

Hygrothermal aging mechanism of carbon fiber/epoxy resin composites based on quantitative characterization of interface structure

Mesoscale analysis of aging mechanical behaviors of 3D woven composites

Experimental Investigation and Modeling of Dynamic Thermomechanical Behavior of 4-Harness Satin Weave Carbon/epoxy Composites

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Modeling Long-Term Creep and Physical Aging Behavior of Carbon/Epoxy Composites Based on Coupling Model

Modeling Study on the Mechanical Performance of CFRP/Al Single-Lap Rivet Joints under Hygrothermal Environmental Conditions

Experimental and multiscale modeling investigations of cryo-thermal cycling effects on the mechanical behaviors of carbon fiber reinforced epoxy composites

Experimental characterization and numerical prediction for mechanical aging of epoxy and its carbon fiber‐reinforced composite under hydrothermal conditions

Effect of Hygrothermal Aging on Compression Behavior of CFRP Material with Different Layups

Macro and Micro-interfacial properties of carbon fiber reinforced epoxy resin composite under hygrothermal treatments

Long‐term creep deformation of carbon fiber/epoxy composites with physical aging: Experimental investigation and constitutive modeling

Advances of Hydrothermal Property Study of Carbon Fiber Reinforced Epoxy Laminates

Hygrothermal Aging Effects on the Mechanical Behavior of Scarf-Repaired Composite Laminates

Development of a hygrothermal constitutive model for epoxy resin considering the glass transition temperature and its applications

Characterization of nonlinear viscoelastic behaviors of CF/EP laminates with consideration to physical aging effect under thermo-mechanical loading

Study on Hygrothermal Properties of Carbon Fiber Reinforced Composites Aged in Cyclic Environment

A progressive failure analysis model for composite structures in hygrothermal environments