Abstract:Endovascular prostheses, assembled from tubular textile fabric and wire stent components, are deployed and expanded non-invasively from catheters for the repair of aneurysms in medium and large caliber arteries. Manufacturers prefer woven fabrics or porous tubes to be supported by a metallic frame. Woven fabrics can be manufactured much thinner than any knitted structure, and thus they permit the use of a smaller delivery catheter. As the key component of an endovascular prosthesis, the tubular textile fabric plays a vital role in separating the pathological vasculature from the normal blood circulation. It is therefore important to understand the relationship between the design parameters of the textile fabric and the mechanical properties of the endovascular prosthesis. In this study, a series of woven endovascular prototype structures were woven using a range of different weft yarns and two different weave designs. Using a 30 denier polyester (PET) multifilament yarn in the warp direction, tubular textile fabrics were woven in 3/1 twill and plain weave constructions with 20 and 30 denier monofilament and multifilament polyester (PET) weft yarns. The samples were woven on a specially built narrow width prototyping loom, followed by finishing, which was carried out in order to achieve improved cleanliness, uniformity and dimensional stability. Before and after finishing, the basic dimensional parameters, such as thickness and density, and important physical properties, such as water permeability and bursting strength, were measured and compared. By this approach we were able to determine the relationships between the woven textile design parameters and the physical properties of endovascular prostheses, and to conclude that the use of different yarns and weave types leads to different trends in thickness, bursting strength, and water permeability performance.

Analysis of Polymeric Braided Tubular Structures Intended for Medical Applications

A Hybrid Tubular Braid With Improved Longitudinal Stiffness For Medical Catheter

Finite element analysis of braided dense-mesh stents for carotid artery stenosis

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

Preparation of a poly(L-lactic acid) braided stent with high radial force

Influence Of Textile Design And Processes On The Mechanical Properties Of Woven Endovascular Prostheses

Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided Preform

Structural mechanics of 3-D braided preforms for composites. IV - The 4-step tubular braiding

Elastic recovery of polymeric braided stents under cyclic loading: Preliminary assessment

Finite element analysis of 2-D tubular braided composite based on geometrical models to study mechanical performances

Analysis of Thermomechanical Behavior of the Tubular Braided Fabrics with Flax/Polyamide Commingled Yarns

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

An experimental and theoretical investigation into the effect of braiding angle and combination on a tensile modulus of the tubular biaxial hybrid braids

Regulating mechanical performance of poly (l-lactide acid) stent by the combined effects of heat and aqueous media

Development of a generalized analytical model for tubular braided-architecture composites

A study of a biodegradable braided Mg stent for biliary reconstruction

Mechanical Property of Thermoplastic Polyurethane Vascular Stents Fabricated by Fused Filament Fabrication

On the topological yarn structure of 3-D rectangular and tubular braided preforms

Tensile response of tubular braids with an elastic core

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses