Abstract:Braiding is an attractive manufacturing method for tubular elements such as hollow shafts and struts. One of the main challenges however is the integration of suitably performing end-fittings. Recent advances in additive layer manufacture have enabled the fabrication of end-fittings which can be ‘co-impregnated’ or ‘co-cured’ with the fibre preform in a single step, i.e. without the need for secondary adhesive bonding. This requires the introduction of protrusions onto the surface of the end-fitting to promote mechanical interlocking with the fibres. However, the lack of accurate modelling tools for the simulation of this manufacturing process means that much empiricism is currently used in the design of such structures. A novel numerical framework is presented here for the full-scale simulation of the braiding process over structured end-fittings. Nonlinear finite element analysis is applied at the meso-scale, with strands of beam elements representing individual yarns and meshed surfaces modelling the mandrel and tooling. Penalty-based contact formulations are then used to simulate all inter-yarn and yarn-metal interactions, enabling detailed predictions of fibre paths around surface protrusions. In order to verify and validate this numerical framework, a series of full-scale braiding experiments was conducted using additively-manufactured thermoplastic mandrels. Final braid patterns as well as the occurrence of braid imperfections were investigated and compared to model predictions. It is shown that the proposed modelling strategy reproduces well the trends observed experimentally in terms of final braid quality. A parametric study was then conducted on the effects of initial end-fitting alignment with respect to oncoming yarns, suggesting that better control over this parameter could reduce considerably the occurrence of braid imperfections.

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

An Experimental and Numerical Study of the Mechanical Properties of 3-D Braided Structural Textile Composites

Microstructure Analysis of 4-Step Three-Dimensional Braided Composite

Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided Preform

High-fidelity modeling of the braiding process for generating the realistic mesostructure of preforms in braided composites

Structural mechanics of 3-D braided preforms for composites. IV - The 4-step tubular braiding

Microstructure Analysis and Prediction of the Elastic Properties of 3D and 5-D Tubular Braided Composites

Theoretical analysis of braiding strand trajectories and simulation of three-dimensional parametric geometrical models for multilayer interlock three-dimensional tubular braided preforms

On the topological yarn structure of 3-D rectangular and tubular braided preforms

Integrated Design For Manufacturing of Braided Preforms For Advanced Composites Part II: 3D Braiding

Microstructural Modeling and Second-Order Two-Scale Computation for Mechanical Properties of 3d 4-Directional Braided Composites

Rectangle Preform Simulation for 3-D Braided Composites

Multi-scale modeling and elastic properties prediction of 3D four-directional tubular braided composites

The formation mechanism of gradient properties and the regulation mechanism of elastic properties in three‐dimensional tubular braided composites

Automatically Generated Geometric Description of 3D Braided Rectangle Preform

Microstructure and Mechanical Properties of Three-Dimensional Five-Directional Braided Composites

Unit-cell geometry and mechanical properties of three-dimensional seven-directional braided composites

Microstructure and Unit-Cell Geometry of Four-Step Three-Dimensional Rectangular Braided Composites

Experimental and numerical studies on the braiding of carbon fibres over structured end-fittings for the design and manufacture of high performance hybrid shafts

Progressing in the Study on Mechanical Properties of the 3D Braided Composites

Research Progress on Preform Forming and Microstructure of 3D Braided Composites