Abstract:The fully biodegradable polymer stent is considered as the fourth-generation vascular implant with good biocompatibility and long-term therapeutic potential. It has attracted much attention because it overcomes the disadvantage of the permanently implanted metal stent. However, compared with the metal stent, its mechanical properties are slightly inferior, which is an urgent problem. Based on previous studies, fully biodegradable polymer stents are prone to experience cracks and damage in large deformation region during the crimping and expansion process. The large deformation region is mainly located at the ring bend of the stent. We supposed that these damages are the leading causes of weakening the mechanical performance of polymer stents and are mainly affected by the crucial deformation region. For this purpose, this work studies the relationship between different crucial deformation regions and the mechanical performance of the polymer stent. Firstly, the volume of the crucial deformation region is improved by increasing the ring width. Although the radial strength of the stent is enhanced with the increase in ring width, the radial stiffness also increases, and correspondingly, the flexibility of the stent decreases. To obtain acceptable comprehensive mechanical performance, two types of slotting design in critical deformation region were proposed. The proposed slotted stent with a bulge has sufficient radial strength and low radial stiffness, having a good radial support capacity and flexibility. In other words, the proposed stent has improved the radial support without sacrificing flexibility. Overall, different crucial deformation regions cause different degrees of damage to the stent during crimping and expansion, which affects the mechanical properties of the stent. Reasonable structural design of the crucial deformation region is the key to adjust the comprehensive performance of the stent.

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

Mixed-braided Stent: an Effective Way to Improve Comprehensive Mechanical Properties of Poly (L-Lactic Acid) Self-Expandable Braided Stent.

Evaluation of Resistance to Radial Cyclic Loads of Poly(l-Lactic Acid) Braided Stents with Different Braiding Angles.

Evaluation of Mechanical Properties of Poly( L ‐lactic Acid) Braided Stents with Axial Stiffeners

A Study of the Radial and Bending Performance for Poly (l‐lactic Acid) Braided Stents with Innovative Runners

Effects of Constraint Between Filaments on the Radial Compression Properties of Poly (L-Lactic Acid) Self-Expandable Braided Stents

Influence of Parameters on Mechanical Properties of Poly (L-Lactic Acid) Helical Stents.

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

A Poly(l‐lactic Acid) Monofilament with High Mechanical Properties for Application in Biodegradable Biliary Stents

Key Factors of Mechanical Strength and Toughness in Oriented Poly(l-lactic Acid) Monofilaments for a Bioresorbable Self-Expanding Stent.

Poly(l-lactic Acid) Monofilaments for Biodegradable Braided Self-Expanding Stent

Evaluation of Poly (L-Lactic Acid) Monofilaments with High Mechanical Performance in Vitro Degradation

Design and characterization of PLLA stents with Z-structure

Design Strategy of Poly (l‐lactic Acid) Mixed Braided Stent: the Influence of Braiding Ratio of Thick and Thin Monofilaments

The Effect of Intrinsic Characteristics on Mechanical Properties of Poly(l-Lactic Acid) Bioresorbable Vascular Stents.

Preparation of a poly(L-lactic acid) braided stent with high radial force

Critical Parameters for the Properties of Poly (l‐Lactic Acid) Mixed‐Braided Stent: Monofilaments Diameter and Friction Coefficient

Evaluation of the Stress Relaxation Behavior of Poly (l‐lactic Acid) Self‐expanding Braided Stents

Regulating mechanical performance of poly (l-lactide acid) stent by the combined effects of heat and aqueous media

Focus on the Crucial Deformation Region to Adjust the Comprehensive Performance of Poly (L-Lactic Acid) Stent.

A biodegradable polymer stent with high radial performance: Potential for treatment of portal vein stenosis