Abstract:Braiding is an attractive manufacturing method for tubular elements such as hollow shafts and struts. One of the main challenges however is the integration of suitably performing end-fittings. Recent advances in additive layer manufacture have enabled the fabrication of end-fittings which can be ‘co-impregnated’ or ‘co-cured’ with the fibre preform in a single step, i.e. without the need for secondary adhesive bonding. This requires the introduction of protrusions onto the surface of the end-fitting to promote mechanical interlocking with the fibres. However, the lack of accurate modelling tools for the simulation of this manufacturing process means that much empiricism is currently used in the design of such structures. A novel numerical framework is presented here for the full-scale simulation of the braiding process over structured end-fittings. Nonlinear finite element analysis is applied at the meso-scale, with strands of beam elements representing individual yarns and meshed surfaces modelling the mandrel and tooling. Penalty-based contact formulations are then used to simulate all inter-yarn and yarn-metal interactions, enabling detailed predictions of fibre paths around surface protrusions. In order to verify and validate this numerical framework, a series of full-scale braiding experiments was conducted using additively-manufactured thermoplastic mandrels. Final braid patterns as well as the occurrence of braid imperfections were investigated and compared to model predictions. It is shown that the proposed modelling strategy reproduces well the trends observed experimentally in terms of final braid quality. A parametric study was then conducted on the effects of initial end-fitting alignment with respect to oncoming yarns, suggesting that better control over this parameter could reduce considerably the occurrence of braid imperfections.

A Hybrid Tubular Braid With Improved Longitudinal Stiffness For Medical Catheter

Finite element analysis of braided dense-mesh stents for carotid artery stenosis

Analysis of Polymeric Braided Tubular Structures Intended for Medical Applications

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

A Novel Wavy Non-Uniform Ligament Chiral Stent with J-shaped Stress–strain Behavior to Mimic the Native Trachea

An experimental and theoretical investigation into the effect of braiding angle and combination on a tensile modulus of the tubular biaxial hybrid braids

Unveiling the Mechanics of Deep-Sea Sponge-Inspired Tubular Metamaterials: Exploring Bending, Radial, and Axial Mechanical Behavior

Flow-induced alignment of titanium dioxide nanorods in polyolefin tubes for use in catheters

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses

Development of a Bionic Tube with High Bending-Stiffness Properties Based on Human Tibiofibular Shapes

Preparation of a poly(L-lactic acid) braided stent with high radial force

Three-point Bending Behavior and Energy Absorption Capacity of Composite Tube Reinforced by Gradient Braided Structure in Radial Direction

Experimental and numerical studies on the braiding of carbon fibres over structured end-fittings for the design and manufacture of high performance hybrid shafts

Biaxial reinforcements for polyethylene medical-tubes via helical convergent flow

Robust mechanical, lubricated and biocompatible molybdenum disulfide/polypropylene catheter via flow-directed preferential alignment and fluorination treatment

Mechanical analysis of the auxetic behavior of novel braided tubular structures by the finite element method

Experimental study on the mechanical properties of three‐dimensional braided composite circular tubes with preembedded licker‐in

Coating Strategy for Surface Modification of Stainless Steel Wire to Improve Interfacial Adhesion of Medical Interventional Catheters

Novel processing technology and mesoscopic geometric modeling of a new three-dimensional (3D) braided composite and the study on its longitudinal mechanical properties

Theoretical Modeling on the Deformation Behavior of Auxetic Tubular Braid Made from Modified Circular Braiding Technique