Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

XPS investigation of 5N purity Al thin foils for MEMS devices

Metal-organic Chemical Vapor Deposition of Aluminium Oxynitride from Propylamine–dimethylaluminium Hydride and Oxygen: Growth Mode Dependence and Performance Optimization

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

RF Reactive Sputtering AlN Thin Film at Room Temperature for CMOS-compatible MEMS Application

Nanotribological Behavior of Ultra-thin Al 2 O 3 Films Prepared by Atomic Layer Deposition

High Quality Silicon-Based Aln Thin Films For Mems Application

Piezoelectric aluminum nitride thin-films: A review of wet and dry etching techniques

Ultrathin Free-Standing Oxide Membranes for Electron and Photon Spectroscopy Studies of Solid–Gas and Solid–Liquid Interfaces

Effect of Na3AlF6 on the Structure and Mechanical Properties of Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy

Fabrication of Ultrathin Al Foils by Accumulative Pack Rolling: Influence of Pack Materials

Fabrication and Characterization of AlN-based, CMOS compatible Piezo-MEMS Devices

Nanocontrolled thinning of the barrier layer thickness of porous anodic films using galvanodynamic polarization of aluminum alloys

Influence of underlayer roughness on the properties of Sc0.4Al0.6N thin films prepared via sputter deposition

Low temperature aluminum nitride thin films for sensory applications

Fabrication of MEMS components using ultrafine-grained aluminium alloys

Metalorganic Chemical Vapor Deposition of AlN on High Degree Roughness Vertical Surfaces for MEMS Fabrication

Characterisation of Aluminium Nitride Films and Surface Acoustic Wave Devices for Microfluidic Applications

Near-surface analysis of magnetron sputtered AlCrNbYZrN x high entropy materials resolved by HAXPES

Growth of Ultrathin Al2O3 Films on n-InP Substrates as Insulating Layers by RF Magnetron Sputtering and Study on the Optical and Dielectric Properties

The synthesis and mechanical property evaluation of Ni/Ni3Al microlaminates

CMOS-Integrated Aluminum Nitride MEMS: A Review