Abstract:To date, most surface acoustic wave (SAW) devices have been made from bulk piezoelectric materials, such as quartz, lithium niobate or lithium tantalite. These bulk materials are brittle, less easily integrated with electronics for control and signal processing, and difficult to realize multiple wave modes or apply complex electrode designs. Using thin film SAWs makes it convenient to integrate microelectronics and multiple sensing or microfluidics techniques into a lab-on-a-chip with low cost and multi-functions on various substrates (silicon, glass or polymer). In the work, aluminum nitride (AlN)-based SAW devices were fabricated and characterized for discrete microfluidic (or droplet based) applications. AlN films with a highly c -axis texture were deposited on silicon substrates using a magnetron sputtering system. The fabricated AlN/Si SAW devices had a Rayleigh wave mode at a frequency of 80.3 MHz (with an electromechanical coupling coefficient k 2 of 0.24 % and phase velocity v p of 5,139 m/s) and a higher-frequency-guided wave mode at 157.3 MHz (with a k 2 value of 0.22 % and v p of 10,067 m/s). Both modes present a large out of band rejection of ~15 dB and were successfully applied for microfluidic manipulation of liquid droplets, including internal streaming, pumping and jetting/nebulization, and their performance differences for microfluidic functions were discussed. A detailed investigation of the influences of droplet size (ranging from 3 to 15 μL) and RF input power (0.25–68 W) on microdroplet behavior has been conducted. Results showed that pumping and jetting velocities were increased with an increase of RF power or a decrease in droplet size.

CMOS-Integrated Aluminum Nitride MEMS: A Review

Aluminum Nitride Thin Film Based Reconfigurable Integrated Photonic Devices

Fabrication and Characterization of AlN-based, CMOS compatible Piezo-MEMS Devices

Piezoelectric aluminum nitride thin-films: A review of wet and dry etching techniques

RF Reactive Sputtering AlN Thin Film at Room Temperature for CMOS-compatible MEMS Application

Membraneless Piezoelectric MEMS speakers based on AlN Thin Film

A Review of the Recent Applications of Aluminum Nitride-Based Piezoelectric Devices

High Quality Silicon-Based Aln Thin Films For Mems Application

Scaling of piezoelectric in-plane NEMS: Towards nanoscale integration of AlN-based transducer on vertical sidewalls

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Impact of deposition temperature on structural and electrical properties of sputtered AlN/ Si (111) for CMOS compatible MEMS

Flexible Surface Acoustic Wave Device with Aln Film on Polymer Substrate

Nitride-Based Materials for Flexible MEMS Tactile and Flow Sensors in Robotics

The Design of Aluminum Nitride-Based Lead-Free Piezoelectric MEMS Accelerometer System

Evaluation of residual stress of c oriented AlN/Si (111) and its impact on mushroom-shaped piezoelectric resonator

AlScN-Based Dual-Mode Devices With Temperature Compensated Strategy and Process Optimization

Systematic approach for high piezoelectric AlN deposition

A Resonant Z-Axis Aluminum Nitride Thin-Film Piezoelectric MEMS Accelerometer

Discrete Microfluidics Based on Aluminum Nitride Surface Acoustic Wave Devices

Aluminum nitride photonic integrated circuits: from piezo-optomechanics to nonlinear optics

Design and Characterization of an Aluminum Nitride-Based MEMS Hydrophone With Biologically Honeycomb Architecture