Abstract:It is a great challenge to detect in-situ high-frequency vibration signals for extreme environment applications. A highly sensitive and robust vibration sensor is desired. Among the many piezoelectric materials, single-crystal lithium niobate (LiNbO3) could be a good candidate to meet the demand. In this work, a novel type of micro-electro-mechanical system (MEMS) vibration sensor based on a single crystalline LiNbO3 thin film is demonstrated. Firstly, the four-cantilever-beam MEMS vibration sensor was designed and optimized with the parametric method. The structural dependence on the intrinsic frequency and maximum stress was obtained. Then, the vibration sensor was fabricated using standard MEMS processes. The practical intrinsic frequency of the as-presented vibration sensor was 5.175 kHz, which was close to the calculated and simulated frequency. The dynamic performance of the vibration sensor was tested on a vibration platform after the packaging of the printed circuit board. The effect of acceleration was investigated, and it was observed that the output charge was proportional to the amplitude of the acceleration. As the loading acceleration amplitude is 10 g and the frequency is in the range of 20 to 2400 Hz, the output charge amplitude basically remains stable for the frequency range from 100 Hz to 1400 Hz, but there is a dramatic decrease around 1400 to 2200 Hz, and then it increases significantly. This should be attributed to the significant variation of the damping coefficient near 1800 Hz. Meanwhile, the effect of the temperature on the output was studied. The results show the nearly linear dependence of the output charge on the temperature. The presented MEMS vibration sensors were endowed with a high output performance, linear dependence and stable sensitivity, and could find potential applications for the detection of wide-band high-frequency vibration.

The Design of Aluminum Nitride-Based Lead-Free Piezoelectric MEMS Accelerometer System

A Resonant Z-Axis Aluminum Nitride Thin-Film Piezoelectric MEMS Accelerometer

Enhancement of c-Axis Oriented Aluminum Nitride Films via Low Temperature DC Sputtering

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

An Aluminum Nitride-Based Dual-Axis MEMS In-Plane Differential Resonant Accelerometer

A MEMS Piezoelectric In-Plane Resonant Accelerometer Based on Aluminum Nitride with Two-Stage Microleverage Mechanism

A High-Sensitivity MEMS Accelerometer Using a Sc0.8Al0.2N-Based Four Beam Structure

An aerosol deposition based MEMS piezoelectric accelerometer for low noise measurement

Design and Development of a Low-Power Wireless MEMS Lead-Free Piezoelectric Accelerometer System

In Situ Synchrotron XRD Characterization of Piezoelectric Al1-xScxN Thin Films for MEMS Applications

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Design of a Triaxial Piezoelectric Accelerometer

High-Performance Piezoelectric-Type MEMS Vibration Sensor Based on LiNbO3 Single-Crystal Cantilever Beams

Design and Testing on High Sensitive Micro-accelerometer Based on HEMT

Development of a MEMS Piezoresistive High-g Accelerometer with a Cross-Center Block Structure and Reliable Electrode

A high sensitivity piezoelectric MEMS accelerometer based on aerosol deposition method

Fabrication and Characterization of AlN-based, CMOS compatible Piezo-MEMS Devices

CMOS-Integrated Aluminum Nitride MEMS: A Review

Theoretical and numerical investigation of a new 3-axis SU-8 MEMS piezoresistive accelerometer

A Mems Piezoelectric In-Plane Resonant Accelerometer With Two-Stage Micro-Leverage Mechanism