Abstract:A method of molecular beam epitaxy deposition combined with in situ oxygen doping is developed to prepare CdS:O films. This method effectively passivates the sulfur vacancies and enhances the [hk1] orientation of antimony selenosulfide (Sb2(S,Se)3), which improves the carrier transport performance and ultimately achieves the improvement of the power conversion efficiency of Sb2(S,Se)3 solar cells. Antimony selenosulfide (Sb2(S,Se)3) is considered as a promising light‐harvesting material and has been widely used in solar cells. For high‐efficiency Sb2(S,Se)3 solar cells, the most commonly used electron‐transporting layer of cadmium sulfide (CdS) is generally prepared by chemical bath deposition (CBD) approach. However, the hazardous waste liquid from the chemical bath and the sensitivity of the deposition process to the environment are challenges to practical applications. Herein, a molecular beam epitaxy deposition is reported to prepare CdS films, overcoming the drawbacks of CBD process. Furthermore, through introducing oxygen during the deposition of CdS, the sulfur vacancy defects generated in the vacuum deposition process are suppressed. The performance of Sb2(S,Se)3 solar cells is accordingly improved significantly. This improvement is attributed to the following aspects: i) the improved optical transmittance of CdS films. ii) The enhanced [hk1] orientation of Sb2(S,Se)3 absorber layer. iii) The improved heterojunction quality and suppressed carrier recombination. As a result, a power conversion efficiency of 8.59% for Sb2(S,Se)3 solar cells is achieved. This study provides a novel strategy for preparing electron‐transporting layers for efficient chalcogenide thin‐film solar cells and sheds new light on large‐area solar cell applications.

9.6%-Efficient all-inorganic Sb 2 (S,Se) 3 solar cells with a MnS hole-transporting layer

Manipulating the Intrinsic Defect of MnS by Surface Sulfidation for Inverted Sb2(S,Se)3 Planar‐Heterojunction Solar Cells

High-efficient Sb 2 Se 3 solar cell using Zn x Cd 1- x S n-type layer

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer

Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment

Stability and Efficiency Enhancement of Antimony Selenosulfide Solar Cells with Inorganic SnS‐Modified Nickel Oxide Hole Transport Materials

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

Enhanced Performance of the Sb 2 Se 3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination

Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency

A bithiophene-cored interfacial passivating layer for Sb2S3 solar cells with 7.1% efficiency

Molecular Beam Epitaxy Deposition of In Situ O‐Doped CdS Films for Highly Efficient Sb2(S,Se)3 Solar Cells

Towards high efficiency inverted Sb2Se3 thin film solar cells