Abstract:A method of molecular beam epitaxy deposition combined with in situ oxygen doping is developed to prepare CdS:O films. This method effectively passivates the sulfur vacancies and enhances the [hk1] orientation of antimony selenosulfide (Sb2(S,Se)3), which improves the carrier transport performance and ultimately achieves the improvement of the power conversion efficiency of Sb2(S,Se)3 solar cells. Antimony selenosulfide (Sb2(S,Se)3) is considered as a promising light‐harvesting material and has been widely used in solar cells. For high‐efficiency Sb2(S,Se)3 solar cells, the most commonly used electron‐transporting layer of cadmium sulfide (CdS) is generally prepared by chemical bath deposition (CBD) approach. However, the hazardous waste liquid from the chemical bath and the sensitivity of the deposition process to the environment are challenges to practical applications. Herein, a molecular beam epitaxy deposition is reported to prepare CdS films, overcoming the drawbacks of CBD process. Furthermore, through introducing oxygen during the deposition of CdS, the sulfur vacancy defects generated in the vacuum deposition process are suppressed. The performance of Sb2(S,Se)3 solar cells is accordingly improved significantly. This improvement is attributed to the following aspects: i) the improved optical transmittance of CdS films. ii) The enhanced [hk1] orientation of Sb2(S,Se)3 absorber layer. iii) The improved heterojunction quality and suppressed carrier recombination. As a result, a power conversion efficiency of 8.59% for Sb2(S,Se)3 solar cells is achieved. This study provides a novel strategy for preparing electron‐transporting layers for efficient chalcogenide thin‐film solar cells and sheds new light on large‐area solar cell applications.

Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity

Achievable efficiency improvement of Sb2Se3 thin-film solar cells through interface engineering

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

Defects Passivation via Potassium Iodide Post‐Treatment for Antimony Selenosulfide Solar Cells with Improved Performance

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

Oxygen Content Modulation Toward Highly Efficient Sb2Se3 Solar Cells

Performance improvement of Sb2Se3 thin-film solar cells through ultraviolet ozone treatment

Regulating Deposition Kinetics via A Novel Additive-assisted Chemical Bath Deposition Technology Enables 10.57%-efficient Sb2Se3 Solar Cells

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Molecular Beam Epitaxy Deposition of In Situ O‐Doped CdS Films for Highly Efficient Sb2(S,Se)3 Solar Cells

Fabricating over 7%-efficient Sb2(S,Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source

Thermal diffused post-selenization for enhancing the photovoltaic performance of thermally evaporated Sb 2 Se 3 solar cell

Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells

Selenium‐Rich Sb2(S,Se)3 Thin Films Deposited via Sequential Chemical Bath Deposition for High‐Efficiency Solar Cells

Temperature‐Gradient Solution Deposition Amends Unfavorable Band Structure of Sb2(S,Se)3 Film for Highly Efficient Solar Cells