Abstract:Sb2Se3 is an emerging and promising light-absorbing material with superior photovoltaic properties. However, the specific one-dimensional structure of Sb2Se3 limits the doping density, preventing a high built-in potential. Moreover, in the superstrate devices the back contact is often non-ohmic. In this work, we have successfully applied tungsten oxide (WO3-x) as a hole-transport layer in superstrate n-i-p Sb2Se3 solar cells. It is found that an interfacial dipole is formed at Sb2Se3/WO3-x interface via Sb–W bonds, which reduces the barrier for hole extraction. Meantime, gap states are present at a suitable energy level to serve as intermediate states for hole-transport from the Sb2Se3 absorber to the metal anode. In addition, the introduction of WO3-x can suppress carrier recombination at the back interface, enhance the built-in potential, and improve the spectral response in the long-wavelength region. Consequently, the superstrate devices with the incorporated WO3-x layer achieve a champion efficiency of 7.10% due to the enhancement of all device parameters. Furthermore, the all-inorganic devices with WO3-x hole-transport layer exhibit excellent air stability and thermal stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10629?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10629</a>.XPS, SEM of WO3-x films; Tauc plots for band gap calculation of WO3-x film; integrated Jsc; current density–voltage (J–V) curves measured in both forward and reverse scan directions; dV/dJ with the fit used to determine R; cross-sectional SEM and AFM of Sb2Se3 films covered with WO3-x layers; the Voc, Jsc, and FF evolution (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10629/suppl_file/am0c10629_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Stability and Efficiency Enhancement of Antimony Selenosulfide Solar Cells with Inorganic SnS‐Modified Nickel Oxide Hole Transport Materials

Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Enhancement in the efficiency of Sb2(S,Se)3 thin-film solar cells with Spin-coating NiOx as the hole transport layer

InCl3-modified SnO2 as Electron Transporting Layer for Cd-free Antimony Selenide solar cells

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

Oxygen‐Assisted Tailoring of Evaporated PbS Hole Transport Layer for Highly Efficient Antimony Sulfide Solar Cells

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Electron Transport Layer Engineering Induced Carrier Dynamics Optimization for Efficient Cd‐Free Sb2Se3 Thin‐Film Solar Cells

Enhancement in the Efficiency of Sb2Se3 Solar Cells by Triple Function of Lithium Hydroxide Modified at the Back Contact Interface

High-efficiency and stable Sb2(S,Se)3 thin film solar cells with phthalocyanine as a hole transport layer

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer

Defects Passivation via Potassium Iodide Post‐Treatment for Antimony Selenosulfide Solar Cells with Improved Performance

Zinc Chloride‐treated Indium Sulfide as Buffer Layer for Cd‐free Antimony Selenide Solar Cells

Efficient CdS/Sb 2 S 3 interfacial modification using sodium borohydride etching for enhanced performance of low-cost full-inorganic antimony-based solar cells

Back Contact Interfacial Modification in Highly-Efficient All-Inorganic Planar n-i-p Sb 2 Se 3 Solar Cells

9.6%-Efficient all-inorganic Sb 2 (S,Se) 3 solar cells with a MnS hole-transporting layer

Defect control for high efficiency antimony selenosulfide solar cells by interface Engineering of buried monoatomic aluminum oxide layer