Abstract:The combustion modes of powder and granular mixtures (100 – X )(Ti + C) + X NiCr ( X = 0–30%) containing Ti powders of different dispersion with different amounts of impurity gases in them are studied. The experimental setup provided the filtration of impurity gases released during combustion in the cocurrent direction or through the side surface of the sample. The difference between the experimental burning velocities of powder mixtures with titanium of a different fineness is explained using a convective-conductive combustion model. For granular mixtures based on Ti powder with a characteristic size of 120 μm, it is shown that combustion occurs in the conductive mode. Comparison of the combustion velocities of granular mixtures containing Ti powder with particles of a characteristic size of 60 μm in the absence and presence of gas filtration through the sample indicates the transition of combustion to the convective regime. The necessary and sufficient conditions for the transition from conductive to convective combustion are formulated, which makes it possible to determine the composition of the mixture whose combustion occurs in the boundary region. In mixtures based on Ti with a particle size of 60 μm, the conductive combustion regime is observed during the combustion of granules 0.6 mm in size and a mixture with X = 30% of granules 1.7 mm in size. For mixtures with X = 0–20% with granules 1.7 mm in size, burning in the convective regime, the interfacial heat transfer coefficients are evaluated using the experimental data. Their values are more than an order of magnitude higher than the theoretical ones. The XRD results of the combustion products showed that in order to obtain synthesis products without side phases of intermetallic compounds, it is necessary to use finely dispersed titanium powder.

Conductive and Convective Combustion Modes of Granular Mixtures of Ti–C–NiCr

Study of Patterns and Mechanisms of Combustion of a Powdered and Granulated Ti–C–B System

Various Types of Combustion of a Ti + C Granular Mixture with a Different Content of the Gasifying Additive

Combustion Macrokinetics of Titanium Containing Mixtures: Effect of Mixture Structure and Titanium Particle Size

Mechanosynthesis Mechanism of Tic Powders

Features of SHS of multicomponent carbides

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Granularity Collocation of Single Coal on Comprehensive Combustion of Blends

Study of gasless combustion products of Ti – Si – Al powder mixtures

Combustion synthesis of porous TiC/Ni composites under high gravity

Microstructural Evolution in the Combustion Synthesis of Titanium Carbide

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

Combustion Synthesis and Thermal Stress Analysis of TiC–Ni Functionally Graded Materials

Combustion Synthesis of Ti(C,N) Powder

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

The Effect of the Nickel Content and Mechanical Activation on Combustion in the 5Ti + 3Si + xNi System

Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

Ti/CuO Nanothermite—Study of the Combustion Process

Effects of TiAl additions on combustion synthesis of Ti3AlC2 powders

Combustion Synthesis of NiAl/TiC Multiphase Composites and their Related Microstructure