Combustion Macrokinetics of Titanium Containing Mixtures: Effect of Mixture Structure and Titanium Particle Size
B. S. Seplyarskii,R. A. Kochetkov,T. G. Lisina
DOI: https://doi.org/10.1134/s0010508224030031
2024-11-10
Combustion Explosion and Shock Waves
Abstract:Experimental dependences of burning rate of powder and granulated mixtures 5Ti + 3Si, Ti + C , (Ti + C + 20% Cu, (Ti + C + 20% Ni, and Ti + C (with amorphous carbon in the form of soot and crystalline carbon in the form of graphite) on titanium particle size are discussed using different models of combustion front propagation in a condensed medium for the first time. Within the framework of the theory of gasless combustion (with and without account for the mechanism of capillary spreading), microheterogeneous models do not even qualitatively explain the difference in the dependences of the burning rate on the size of titanium particles for powder mixtures of titanium with soot and with graphite or an increase in the burning rate of Ti + C powder mixtures when diluted with nickel and copper, accompanied by a drop in combustion temperature. The restructuring of the medium (granulation of powder mixtures) changes burning rate without changing the phase composition of the synthesis products. Within the framework of the convective–conductive combustion model, all these results are explained uniformly by the inhibitory effect of impurity gases released ahead of the combustion front in powder mixtures with fulfillment of heating conditions of the component particles. The effect of impurity gas release on the burning rate of powder mixtures can be estimated for each composition by the difference in the burning rates of granulated and powder samples. For all the granulated mixtures studied, where the effect of impurity gases on burning rate is leveled, the analytical approximation of the experimental dependence of burning rate on titanium particle size shows qualitative agreement with the dependence that follows from the convective–conductive combustion model.
energy & fuels,engineering, chemical,thermodynamics,materials science, multidisciplinary