Abstract:We present the results of a study on the preparation of dense titanium carbide by SHS compaction. It was found that the use of a mechanically activated reaction mixture of titanium and carbon black powders made it possible to obtain titanium carbide samples with a maximum relative density of 95%. The specific feature of this work is that the mechanical activation of the components of the Ti + C mixtures was carried out in a ball mill for several tens of hours. The influence of the modes of activated mixing on the characteristics of the reaction mixture and combustion parameters was studied. The influence of technological parameters on combustion characteristics and structure of consolidated titanium carbide was also investigated. It was found that the rate and temperature of combustion strongly depend on the size, mass, and density of charge compacts. With an increase in the diameter (20–58 mm) and weight (10–70 g) of pressed samples from mixtures with activated reagents, the combustion rate varied from 10 to 100 cm/s, and the combustion temperature varied from 2200 to 3100°C. A strong influence of the prepressing pressure (applied at the combustion stage) on the combustion rate and temperature was shown: in the pressure range of 0–10 MPa, the combustion rate sharply decreases from 100 to 10 cm/s. In the pressure range of 0–40 MPa, the combustion temperature decreases monotonically from 3000 to 2000°C. A mechanism of high-speed combustion of the reaction mixture of titanium and soot has been proposed, in which the determining factors are the mechanical activation of the components of the mixture (titanium and soot) and the formation of radial cracks (channels) in the pressed samples, which ensure the propagation of incandescent impurity gases into the inner layers and the initiation of the carbidization reaction in the volume of charge compacts.

Combustion Macrokinetics of Titanium Containing Mixtures: Effect of Mixture Structure and Titanium Particle Size

Conductive and Convective Combustion Modes of Granular Mixtures of Ti–C–NiCr

Study of Patterns and Mechanisms of Combustion of a Powdered and Granulated Ti–C–B System

Various Types of Combustion of a Ti + C Granular Mixture with a Different Content of the Gasifying Additive

Mechanosynthesis Mechanism of Tic Powders

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Size Resolved High Temperature Oxidation Kinetics of Nano-Sized Titanium and Zirconium Particles.

Microstructural Evolution in the Combustion Synthesis of Titanium Carbide

Combustion Kinetics Characteristics of Solid Fuel in the Sintering Process

Study of gasless combustion products of Ti – Si – Al powder mixtures

Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

Effect of Particle Size of Iron on Reaction Velocity of Combustion Synthesis of Ti-C-Fe System

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Combustion Synthesis of Ti(C,N) Powder

Phases of Titanium Combustion in Air

Effect of Mechanical Activation and Combustion Parameters on SHS Compaction of Titanium Carbide

Microstructural evolution during the combustion synthesis of TiC–Al cermet with larger metallic particles

Effects Investigation of Particle Size and Concentration on the Ignition, Explosion Characteristics, and Behavior of Flame Propagation in TC4 Titanium Alloys

Features of SHS of multicomponent carbides

Flame structures and particle-combustion mechanisms in nano and micron titanium dust explosions