Abstract:Advanced ceramics find significant application areas due to their superior mechanical, electrical, magnetic chemical and thermal properties. By combining these materials, significant properties can be obtained as a result of production of the composites of hard metal compounds in nanoscale dimensions. Self-propagated high-temperature synthesis (SHS) is one of the prominent methods for the production of such nanoparticles. SHS is a combustion synthesis method. In this study, nanocomposite powders of B4C-TiB2 were synthesized by SHS method. FactSage software was used for thermochemical simulation and computational stoichiometric optimization. In the experimental step, 2 different SHS sets were prepared. In the first stage, B4C and TiB2 powders were synthesized. The B4C-TiB2 composite was produced in the final set of experiments. Then, production parameters of B4C-TiB2 composite powders, from B2O3, TiO2, and carbon black, were investigated. Magnesium powder was used as reductant agent. Afterwards, HCl leaching process was performed, and acid concentration was optimized. The effect of carbonic acid and H2O2 addition on dissolution of undesired phases was also been investigated as a new method. Products were characterized by XRD, SEM and BET analysis. B4C-TiB2 composite powder with quite high surface area, fine particle size and high porosity could be synthesized with reasonable purity. According to the results, the optimum molar ratios were determined as TiO2:B2O3:Mg:C = 1:3:12:1.6. Optimum acid concentration was found to be 10.5 M for leaching process, and carbonic acid addition on leaching step found to be effective on TiO2 removal. The highest purity could be obtained with 50%-50% stoichiometry. It has also been determined that the synthesis of B4C-TiB2 composite powder has a positive effect on both the chemical content and the morphology that will increase the sintering ability.

Effect of Mechanical Activation and Combustion Parameters on SHS Compaction of Titanium Carbide

SHS Compaction of TiC-Based Cermets Using Mechanically Activated Mixtures

Effect of Ethanol on the Phase and Elemental Composition of Mechanically Activated Titaniumcarbon Powder Mixtures

Investigation of TiC formation during ball-milling of elemental titanium and carbon

Preparation of Dense TiB2 by Forced Self-Propagating High-Temperature Synthesis Compaction with Mechanical Activation of Reagents

Features of SHS of multicomponent carbides

Structure and Phase Composition of SHS Products in Powder Mixtures of Titanium, Carbon, and Aluminum

Effect of Mechanical Activation of Al-Ti-B Powder Mixture on Phase Composition and Structure of Al-TiB2 Composite Materials Obtained by Self-Propagating High-Temperature Synthesis (SHS)

Mechanosynthesis Mechanism of Tic Powders

Combustion Macrokinetics of Titanium Containing Mixtures: Effect of Mixture Structure and Titanium Particle Size

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Microstructural Evolution in the Combustion Synthesis of Titanium Carbide

Study of Patterns and Mechanisms of Combustion of a Powdered and Granulated Ti–C–B System

Preparation of Titanium Carbide by Carburisation of Titanium Dioxide

Production of B4C-TiB2 composite powder by self-propagating high-temperature synthesis

Compacting of Material by Combining Spark Plasma Sintering and Self-Propagating High-Temperature Synthesis in Ti–Al–C System

Using A Cobalt Activator to Synthesize Titanium Carbide (tic) Nanopowders

Rapid Synthesis of Bulk Ti2alc by Self-Propagating High Temperature Combustion Synthesis with A Pseudo-Hot Isostatic Pressing Process

Synthesis and Sintering of Tungsten and Titanium Carbide: A Parametric Study

SYNTHESIS OF COMPOSITE POWDERS «TIC – NICRBSI ALLOY BINDER» FOR CLADDING AND DEPOSITION OF WEAR-RESISTANT COATINGS

Effect of Pressure on Combustion Synthesis of TiC/Fe-Cu Composites under the Action of Electric Current