Abstract:Li-ion batteries are expected to become the mainstream devices for green energy storage or power supply in the future due to their advantages of high energy and power density and long cycle life. Monitoring the temperature and strain change characteristics of Li-ion batteries during operation is conducive to judging their safety performance. The hinged differential lever sensitization structure was used for strain sensitization in the design of an FBG sensor, which also allowed the simultaneous measurement of strain and temperature. The temperature and strain variation characteristics on the surface of a Li-ion soft-packed battery were measured using the des.igned sensor. This report found that the charging and discharging processes of Li-ion batteries are both exothermic processes, and exothermic heat release is greater when discharging than when charging. The strain on the surface of Li-ion batteries depends on electrochemical changes and thermal expansion effects during the charge and discharge processes. The charging process showed an increasing strain, and the discharging process showed a decreasing strain. Thermal expansion was found to be the primary cause of strain at high rates.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to accurately monitor the surface temperature and strain changes during the charging and discharging process of lithium - ion batteries. Specifically, the paper proposes a design based on fiber Bragg grating (FBG) sensors, combined with a hinged differential lever sensitization structure, to achieve simultaneous measurement of the surface temperature and strain of lithium - ion pouch batteries. This helps to evaluate the safety performance of lithium - ion batteries, especially the thermal effect and mechanical deformation characteristics during the charging and discharging process. ### Background and Problems of the Paper Lithium - ion batteries are considered to be the main devices for future green energy storage or power supply due to their high energy density, high power density, and long cycle life, etc. However, during the charging and discharging process, lithium - ion batteries may have safety problems such as swelling, failure, and thermal runaway, which seriously affect the development of the industry and personal safety. Therefore, it is crucial to achieve safety testing of lithium - ion batteries and determine the strain, stress, and temperature changes during their operation. ### Main Research Contents 1. **Sensor Design**: - **Principle of FBG Sensor**: The FBG sensor uses a broadband light source as a laser source and transmits light through the fiber core. When the resonance condition is met, light of a specific wavelength will be reflected, and the remaining wavelengths will continue to propagate along the fiber. Changes in external parameters will affect the effective refractive index and grating period of the fiber, resulting in a change in the Bragg wavelength. - **Hinged Differential Lever Sensitization Structure**: In order to improve the sensitivity of the FBG sensor, a hinged sensitization structure based on the differential lever amplification principle is designed. This structure can amplify external strain and improve the detection accuracy of the sensor. 2. **Simultaneous Measurement of Temperature and Strain**: - **FBG Temperature - Strain Fusion Detection Structure**: By inscribing two FBGs with different central wavelengths on a single fiber, one FBG is used to measure strain, and the other FBG is used to measure temperature. By analyzing the changes in the central wavelengths of the two FBGs, simultaneous measurement of temperature and strain can be achieved. - **Calibration Experiment**: Use a temperature - humidity - heat test chamber and an FBG demodulator to calibrate the sensor and verify the accuracy of its temperature and strain measurement. ### Key Findings - During the charging and discharging process, the surface strain and temperature changes of lithium - ion batteries are significant. The charging process is characterized by an increase in strain, while the discharge process is characterized by a decrease in strain. - Thermal expansion is the main cause of strain during high - rate charging and discharging. - Through the proposed FBG sensor, the temperature and strain changes of lithium - ion batteries can be effectively monitored, providing an important means for evaluating the safety performance of batteries. ### Conclusion This paper proposes an FBG sensor based on a hinged differential lever sensitization structure, which can simultaneously measure the temperature and strain changes on the surface of lithium - ion pouch batteries. This method not only improves the sensitivity and detection accuracy of the sensor but also provides an effective tool for evaluating the safety performance of lithium - ion batteries.

Characterization of Temperature and Strain Changes in Lithium-Ion Batteries Based on a Hinged Differential Lever Sensitization Fiber Bragg Grating Strain–Temperature Simultaneous-Measurement Sensor

Simultaneous Strain and Temperature Discrimination in 18650 Li-ion Batteries Using Polarization-Maintaining Fiber Bragg Gratings

Strain Compensation Methods for Fiber Bragg Grating Temperature Sensors Suitable for Integration into Lithium-Ion Battery Electrolyte

Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

Temperature field monitoring of lithium battery pack based on double-clad fiber Bragg grating sensor

In operando measuring circumferential internal strain of 18650 Li-ion batteries by thin film strain gauge sensors

Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

Towards Long-Term Monitoring of Commercial Lithium-Ion Batteries Enabled by Externally Affixed Fiber Sensors and Strain-Based Prognostic Strategies

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Real-Time Monitoring of Temperature Field Distribution of Three-Element LiB Lithium Battery Using FBG Arrays

Novel SoC-Based FBG Calibration Method for Decoupled Temperature and Strain Analysis within LIB Cells

Customized Optical Fiber Birefringent Sensors to Multipoint and Simultaneous Temperature and Radial Strain Tracking of Lithium‐Ion Batteries

Chemical Strain of Graphite-Based Anode during Lithiation and Delithiation at Various Temperatures

Mechanical characterization of lithium-ion batteries with different chemistries and formats

High-Precision Monitoring of Volume Change of Commercial Lithium-Ion Batteries by Using Strain Gauges

A highly sensitive stretchable constraint fiber mat sensor with tailored near-zero Poisson's ratio for very early stage of battery over charge/overdischarge monitoring

Operando monitoring Lithium-ion battery temperature via implanting femtosecond-laser-inscribed optical fiber sensors

State of Charge Estimation for Commercial Li-Ion Battery Based on Simultaneously Strain and Temperature Monitoring Over Optical Fiber Sensors

A Strain-Resistant Flexible Thermistor Sensor Array Based on CNT/MXene Hybrid Materials for Lithium-Ion Battery and Human Temperature Monitoring

Stress State Characterization of Li-Ion Batteries Based on a Membrane Sensor

A smart Li-ion battery with self-sensing capabilities for enhanced life and safety