Abstract:Lithium-ion batteries (LIB), featuring high energy density and power density, are used in a wide range of applications. One of the most important requirements for their application is to ensure their safety and continuous performance under different operating conditions. In order to ensure the afore mentioned factors, in-situ monitoring of internal cell parameters, such as temperature, state-of-charge, and state-of-health of LIB is essential. The cell temperature is a critical factor for both the safety and the LIB’s health. Not only the average temperature, but also the temperature distribution within the cell must be considered. However, common battery management systems mostly rely on monitoring the surface temperature of the cells, while neglecting changes of the internal parameters. This is where the integration of optical glass fiber sensors into battery cells, which allow direct monitoring of internal temperature changes during operation, makes a significant contribution. In this work, different approaches for the integration of optical glass fiber sensors into battery cells have been evaluated. The focus was set on the complete integration of the glass fiber at specific positions within the LIB, while ensuring that both, the glass fiber, and the battery components remain intact. Furthermore, the influence of the integrated glass fibers on the performance of the LIB was investigated. Finally, their functionality as temperature sensors was evaluated. In a second step, temperature measurements were performed on LIB during operation, using both internal and external sensors. The results obtained clearly reveal an early detection of temperature changes by internal glass fibers compared to external sensors. This not only confirms the efficiency of the internal sensors, but also leads the path to improved battery safety by early detection of critical temperatures within the cell.

Operando monitoring Lithium-ion battery temperature via implanting femtosecond-laser-inscribed optical fiber sensors

Operando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors

Distributed internal thermal monitoring of lithium ion batteries with fibre sensors

Real-Time Monitoring of Temperature Field Distribution of Three-Element LiB Lithium Battery Using FBG Arrays

Temperature field monitoring of lithium battery pack based on double-clad fiber Bragg grating sensor

Distributed thermal monitoring of lithium ion batteries with optical fibre sensors

Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

Ratiometric fluorescence optical fiber enabling operando temperature monitoring in pouch‐type battery

Novel SoC-Based FBG Calibration Method for Decoupled Temperature and Strain Analysis within LIB Cells

Operando monitoring of internal gas pressure in commercial lithium-ion batteries via a MEMS-assisted fiber-optic interferometer

Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

Simultaneous Strain and Temperature Discrimination in 18650 Li-ion Batteries Using Polarization-Maintaining Fiber Bragg Gratings

Increasing Battery Safety of Lithium-Ion Batteries by Using Cell-Internal Glass Fiber Sensors for in-Situ Temperature Monitoring

Thermal monitoring of lithium-ion batteries based on machine learning and fibre Bragg grating sensors

Towards Long-Term Monitoring of Commercial Lithium-Ion Batteries Enabled by Externally Affixed Fiber Sensors and Strain-Based Prognostic Strategies

Customized Optical Fiber Birefringent Sensors to Multipoint and Simultaneous Temperature and Radial Strain Tracking of Lithium‐Ion Batteries

A novel embedded method for in-situ measuring internal multi-point temperatures of lithium ion batteries

An overview on in situ / operando battery sensing methodology through thermal and stress measurements

A Cu/Ni alloy thin-film sensor integrated with current collector for in-situ monitoring of lithium-ion battery internal temperature by high-throughput selecting method

State of Charge Estimation for Commercial Li-Ion Battery Based on Simultaneously Strain and Temperature Monitoring Over Optical Fiber Sensors

A smart Li-ion battery with self-sensing capabilities for enhanced life and safety