Abstract:Rechargeable lithium-ion batteries have been widely commercialized in portable electronics. However, adoption of lithium-ion batteries in more demanding applications such as electric vehicles and renewable energy storage has been hindered by capacity loss and poor performance. Although there has been enormous progress on the advancement of high capacity anode materials such as silicon, the current stage of the cathode performance is a limiting factor for the development of higher performance Li-ion batteries. Lithium iron phosphate, LiFePO 4 , (LFP) is a promising candidate material because it is inexpensive, environmentally friendly and has a high theoretical capacity (170 mAh g -1 ). Unfortunately, LFP suffers from mechanical degredations and surface instabilities that lead to capacity fade. In this work, we investigate in situ stress and strain generation in LFP composite electrodes during battery charging – discharging. Repeated lithiation and delithiation cause continuous stress and strain evolution in the electrode due to lithium intercalation and the interaction between electrode and electrolyte species. Electrodes are constrained on substrate for stress measurements, whereas free-standing electrodes are fabricated for strain measurements. Digital image correlation (DIC) is utilized to measure in situ strain generation, whereas beam curvature technique is employed to monitor in situ stress evolution in the electrode. Electrodes are cycled between 2.6 to 4.4 V at different scan rates in various electrolytes. Strain and stress derivatives are calculated with respect to applied potential. The derivatives provide remarkable information about the evolution of surface stress and structural changes in the electrode due to phase transformations. Electrochemical stiffness is calculated by combining stress and strain. Changes in stiffness during electrochemical cycling reveal underlying mechanisms governing stress and strain evolution in the LFP electrode. Acknowledgement This work was supported as part of the Center for Electrochemical Energy Science (CEES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences.”

Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

High-Fidelity Strain and Temperature Measurements of Li-Ion Batteries Using Polymer Optical Fiber Sensors

Revealing the Electrochemical-Mechanical Correspondence Between Electrode Films and 20 Ah Prismatic Li-ion Batteries Via Optical Fiber Monitoring

Towards Long-Term Monitoring of Commercial Lithium-Ion Batteries Enabled by Externally Affixed Fiber Sensors and Strain-Based Prognostic Strategies

In-situ Monitoring of Internal Temperature and Strain of Solid-State Battery Based on Optical Fiber Sensors

Optical sensors for operando stress monitoring in lithium-based batteries containing solid-state or liquid electrolytes

Customized Optical Fiber Birefringent Sensors to Multipoint and Simultaneous Temperature and Radial Strain Tracking of Lithium‐Ion Batteries

High Precision Strain Monitoring for Lithium Ion Batteries Based on Fiber Bragg Grating Sensors

Design and Investigation of a Sensitivity-Enhanced Fiber Bragg Grating Sensor for Micro-Strain Measurement

Operando temperature monitoring through optical fiber sensor in lithium-ion battery

External Electrode Temperature Monitoring of Lithium Iron Phosphate Batteries Based on Fiber Bragg Grating Sensors

In Operando Monitoring the Stress Evolution of Silicon Anode Electrodes during Battery Operation via Optical Fiber Sensors

Characterization of Temperature and Strain Changes in Lithium-Ion Batteries Based on a Hinged Differential Lever Sensitization Fiber Bragg Grating Strain–Temperature Simultaneous-Measurement Sensor

Implantable Optical Fiber Sensor for Monitoring the Stress Evolution in Lithium-Sulfur Battery

Operando Decoding of Surface Strain in Anode‐Free Lithium Metal Batteries via Optical Fiber Sensor

Operando monitoring of strain field distribution in lithium battery anode via ultra-high spatial resolution optical frequency domain reflectometer

Monitoring Battery Electrolyte Chemistry Via In-Operando Tilted Fiber Bragg Grating Sensors

In Situ Measurement of Strain and Stress Evolution in Lithium Iron Phosphate Electrodes during Electrochemical Cycling

Non-Damaged Lithium-Ion Batteries Integrated Functional Electrode for Operando Temperature Sensing

Direct optical fiber monitor on stress evolution of the sulfur-based cathodes for lithium–sulfur batteries