Abstract:Lithium-ion batteries undergo structural deformation during operation because of the electrochemical-induced strain caused by the insertion of lithium ions inside the active material of the electrodes. In this work, the mechanical characteristic, i.e. thickness change, of batteries with different chemistries (lithium iron phosphate and lithium cobalt oxide) and formats (prismatic and pouch) is measured in-operando and with different current rates. A dedicated test bench is built to carry out the measurements with contactless triangulation optical sensors, sensing the displacement of the battery surfaces. The results are critically discussed, justifying the trajectory of the thickness change observed experimentally with the mechanical properties of the electrode's active materials. Furthermore, the results obtained with the batteries of different chemistries are compared, discussing the reasons underlying these differences. Statistical considerations on the results, such as repeatability errors and cell-to-cell differences, are provided as well. The mechanical characteristic appears as a three-stage linear curve, with two deflection points between the linear sections, and proportional to the state of charge of the battery. In fact, the mechanical characteristic tells the amount of lithium ions stored in each electrode, which together with the stoichiometric range defining the electrodes balancing, is closely related to the state of charge. Then, these measurements reveal an interesting tool for evaluating the state of charge. The two deflection points of the mechanical characteristic are linked to graphite stage changes. Then, these measurements carry the same information about battery degradation as the peaks in differential voltage analysis. The advantage is that the deflection points remain visible at any current rate, but the peaks in the differential voltage analysis vanish at high current rates. Then, these preliminary studies of the mechanical characteristic evidence it can become a promising alternative tool for evaluating the state of health as well.

Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

Distributed thermal monitoring of lithium ion batteries with optical fibre sensors

Towards Long-Term Monitoring of Commercial Lithium-Ion Batteries Enabled by Externally Affixed Fiber Sensors and Strain-Based Prognostic Strategies

Distributed internal thermal monitoring of lithium ion batteries with fibre sensors

Operando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors

Operando monitoring of strain field distribution in lithium battery anode via ultra-high spatial resolution optical frequency domain reflectometer

In Operando Monitoring the Stress Evolution of Silicon Anode Electrodes during Battery Operation via Optical Fiber Sensors

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Operando monitoring of dendrite formation in lithium metal batteries via ultrasensitive tilted fiber Bragg grating sensors

Hollow-core optical fibre sensors for operando Raman spectroscopy investigation of Li-ion battery liquid electrolytes

In operando measuring circumferential internal strain of 18650 Li-ion batteries by thin film strain gauge sensors

Operando Decoding of Surface Strain in Anode‐Free Lithium Metal Batteries via Optical Fiber Sensor

Operando monitoring Lithium-ion battery temperature via implanting femtosecond-laser-inscribed optical fiber sensors

Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

Unravelling Thermal and Enthalpy Evolutions of Commercial Sodium-Ion Cells upon Cycling Ageing via Fiber Optic Sensors

Mechanical characterization of lithium-ion batteries with different chemistries and formats

Deformation and Chemomechanical Degradation at Solid Electrolyte–Electrode Interfaces

Customized Optical Fiber Birefringent Sensors to Multipoint and Simultaneous Temperature and Radial Strain Tracking of Lithium‐Ion Batteries

Real-time stress measurements in lithium-ion battery negative-electrodes

Characterization of Temperature and Strain Changes in Lithium-Ion Batteries Based on a Hinged Differential Lever Sensitization Fiber Bragg Grating Strain–Temperature Simultaneous-Measurement Sensor