Abstract:Lithium-ion batteries undergo structural deformation during operation because of the electrochemical-induced strain caused by the insertion of lithium ions inside the active material of the electrodes. In this work, the mechanical characteristic, i.e. thickness change, of batteries with different chemistries (lithium iron phosphate and lithium cobalt oxide) and formats (prismatic and pouch) is measured in-operando and with different current rates. A dedicated test bench is built to carry out the measurements with contactless triangulation optical sensors, sensing the displacement of the battery surfaces. The results are critically discussed, justifying the trajectory of the thickness change observed experimentally with the mechanical properties of the electrode's active materials. Furthermore, the results obtained with the batteries of different chemistries are compared, discussing the reasons underlying these differences. Statistical considerations on the results, such as repeatability errors and cell-to-cell differences, are provided as well. The mechanical characteristic appears as a three-stage linear curve, with two deflection points between the linear sections, and proportional to the state of charge of the battery. In fact, the mechanical characteristic tells the amount of lithium ions stored in each electrode, which together with the stoichiometric range defining the electrodes balancing, is closely related to the state of charge. Then, these measurements reveal an interesting tool for evaluating the state of charge. The two deflection points of the mechanical characteristic are linked to graphite stage changes. Then, these measurements carry the same information about battery degradation as the peaks in differential voltage analysis. The advantage is that the deflection points remain visible at any current rate, but the peaks in the differential voltage analysis vanish at high current rates. Then, these preliminary studies of the mechanical characteristic evidence it can become a promising alternative tool for evaluating the state of health as well.

Stress State Characterization of Li-Ion Batteries Based on a Membrane Sensor

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

In situ method for stress measurements in film-substrate electrodes during electrochemical processes: key role of softening and stiffening

State-of-Charge Dependence of Mechanical Response of Lithium-Ion Batteries: A Result of Internal Stress

In Situ Electrode Stress Monitoring: An Effective Approach to Study the Electrochemical Behavior of a Lithium Metal Anode

Insights into the Swelling Force in Commercial LiFePO4 Prismatic Cell

In Operando Monitoring the Stress Evolution of Silicon Anode Electrodes during Battery Operation via Optical Fiber Sensors

The Influence of Stress-Dependent Overpotential on Dendrite Growth in All-Solid-state Battery with Cracks

Achieving Stable Lithium Anodes Through Leveraging Inevitable Stress Variations Via Adaptive Piezoelectric Effect.

Stress Evolution in Lithium Metal Electrodes and the Impact of Artificial Passivating Layers

In-situ measurements of electrochemical stress/strain fields and stress analysis during an electrochemical process

An electrochemical-mechanical coupled multi-scale modeling method and full-field stress distribution of lithium-ion battery

Real-time stress measurements in lithium-ion battery negative-electrodes

Stress Fields in Hollow Core–shell Spherical Electrodes of Lithium Ion Batteries

A Fully Coupled Mechano-Electrochemical Model for All-Solid-State Thin-Film Li-Ion Batteries with Non-Porous Electrodes: Effects of Chemo-Mechanical Expansions on Battery Performance and Optimization Strategies for Stress Evolution

Stress and Manufacturability in Solid-State Lithium-Ion Batteries

A highly sensitive stretchable constraint fiber mat sensor with tailored near-zero Poisson's ratio for very early stage of battery over charge/overdischarge monitoring

Effect of external pressure and internal stress on battery performance and lifespan

Stress Evolution in Lithium-ion Composite Electrodes during Electrochemical Cycling and Resulting Internal Pressures on the Cell Casing

Mechanical characterization of lithium-ion batteries with different chemistries and formats

Revealing the mechanism of stress rebound during discharging in lithium-ion batteries