Abstract:Silicon photonic integrated circuits and micro-electro-mechanical systems enable the design of compact, high-performance micro-opto-electro-mechanical systems (MOEMS) gyroscopes, such as recently reported optomechanical gyroscopes. However, effective on-chip light coupling within a confined micro/nano system under vacuum posed challenges for conventional angular velocity measurements in prior optomechanical gyroscopes. Additionally, A core challenge in resonant gyroscopes is directly measuring resonant frequency displacement, necessitating alternative angular velocity detection techniques. Alternatively, this work presents the design of a novel optomechanical gyroscope based on the micro-hemispherical shell resonator integrated with optical ring cavity resonators. This integrated optomechanical device combines the principles of shell resonators and optical ring cavity resonators to enhance gyroscope performance. The high-Q optical ring resonators coupled via evanescent fields from the on-chip silicon waveguide, serve as the basic building block. Overall, the gyroscope design utilizes principles of both mechanical resonators and integrated photonics to address challenges in on-chip light coupling and angular velocity detection for next-generation optomechanical inertial sensors. Numerical simulations demonstrated the optomechanical micro-hemispherical shell resonator gyroscope could attain a calculated scale factor of 77.9 mV/(°/s) and total angle random walk of 0.0662 °/h 1/2 for a micro-hemispherical shell mass of 212 ng at an input laser power of 5 mW. These performance metrics suggest the proposed integrated optomechanical gyroscope design holds promise for applications requiring chip-scale inertial navigation, attitude measurement, and stabilization.

Hemispherical micro-resonators from atomic layer deposition

A 3D-printed microhemispherical shell resonator with electrostatic tuning for a Coriolis vibratory gyroscope

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

High-Q Navigation-Grade Fused-Silica Micro Birdbath Resonator Gyroscope

Manufacture of Hemispherical Shell and Surrounding Eave-Shaped Electrodes

Microsacle PolySilicon Hemispherical Shell Resonating Gyroscopes with Integrated Three-dimensional Curved Electrodes

Thermoelastic Damping Based Design, Sensitivity Study and Demonstration of a Functional Hybrid Gyroscope Resonator for High Quality Factor

Recent Advances in MEMS-Based 3D Hemispherical Resonator Gyroscope (HRG)—A Sensor of Choice

Thermoelastic Dissipation in Diamond Micro Hemispherical Shell Resonators

Surface evolution of fused silica hemispherical resonators and its influence on the quality factor

High-Q Microsphere Resonators for Angular Velocity Sensing in Gyroscopes

Improved HNA Isotropic Etching for Large-Scale Highly Symmetric Toroidal Silicon Molds with < 10-Nm Roughness

Optomechanical Gyroscope Based on Micro-Hemispherical Shell and Optical Ring Resonators

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Low-Damage Trimming of Micro Hemispherical Resonators by Chemical Etching

Flexible Surface Acoustic Wave Device with Aln Film on Polymer Substrate

Decreasing Frequency Splits of Hemispherical Resonators by Chemical Etching

Microscale Glass-Blown Three-Dimensional Spherical Shell Resonators

0.015 Degree-Per-Hour Honeycomb Disk Resonator Gyroscope

Ultra High Q Lithium Niobate Resonator at 15-Degree Three-Dimensional Euler Angle

Fabrication and characterisation of microscale hemispherical shell resonator with diamond electrodes on the Si substrate