Abstract:Two series of glasses compositions, xGeSe 2 -(100-x) As 2 Se 3 (x = 15,42,63,79,94 mol%) and Ge 30 As y Se 70-y (y = 4,10,15,20 mol%), were selected for optimization with a high Brillouin gain coefficient(g B ) by considering both the acousto-optic parameters and the stability of glass against crystallization. The variation in its thermal, mechanical, and material acousto-optic properties were systematically investigated. In the xGeSe 2 -(100-x) As 2 Se 3 series of glasses, the gradual increase of GeSe 2 , resulted in a significant increase in elastic modulus and longitudinal sound velocity (V L ), whereas refractive index(n) and acoustic attenuation(α) decreased rapidly. The decrease in n, and the increase in V L were not conducive to the calculation of the g B . Furthermore, in the Ge 30 As y Se 70-y series of glasses, n increased to a maximum of 2.62, and α decreased to a minimum of 215 dB/cm/GHz 2 , with increasing As content. The highest g B = 33.77 × 10 −11 m/W was obtained in Ge 30 As 20 Se 50 at 1550 nm, and this value was ∼2.3 times greater than that obtained in As 2 S 3 (g B = 14.43 × 10 −11 m/W) and ∼1.6 times greater than that obtained in As 2 Se 3 (g B = 20.89 × 10 −11 m/W) chalcogenide (ChG) glass. On the basis of Ge 30 As 20 Se 50 host glass, a chalcogenide single-refractive-index fiber was drawn with a lowest optical loss of 0.7 dB/m at 6.5 μm. The above results provided an important reference for the further development of new chalcogenide glass fiber with high g B , and broadened the application in Brillouin lasers.

Enhancement of far-infrared laser damage threshold in Ge-As-Se glass fiber

Mid-infrared femtosecond laser-induced damages in As2S3 and As2Se3 chalcogenide glasses

Femtosecond Laser Induced Damage on Ge-As-S Chalcogenide Glasses

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Impacts of hydroxyl and bond energy on laser‐induced damage in mid‐infrared chalcogenide glass

Mid-infrared Supercontinuum Generation in Chalcogenide Fibers with High Laser Damage Threshold.

Mid-Infrared Single-Mode Ge-As-S Fiber for High Power Laser Delivery

Low-loss Ge-As-Se-Te Fiber for High-Intensity CO2 Laser Delivery

Fabrication of mid-IR As-Se chalcogenide glass and fiber with low scattering loss

Mid-infrared nonlinear optical performances of Ge-Sb-S chalcogenide glasses

Ultrafast damage dynamics and ablation mechanism of GaSe induced by femtosecond laser irradiation

Novel Ge-As-Se chalcogenide glass for potential high Brillouin gain coefficient of fiber

Theoretical and Experimental Study of Laser Induced Damage on Gaas by Nanosecond Pulsed Irradiation

Femtosecond laser-induced damage characteristics of mid-infrared oxyfluorogallate glass

Damage characteristics of 193 nm laser irradiated on MgF2 window

Preparation of High Damage Threshold Device Based on Bi2Se3 Film and Its Application in Fiber Lasers

Study on the laser-induced damage characteristics and structure changes of fluorotellurite glass under femtosecond pulsed laser irradiation

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Laser induced damage threshold of GaSe with antireflection microstructures at a wavelength of 5 μm

Highly Er^3+ doped chalcogenide glass with enhanced mid-infrared emission and superior mechanical property