Abstract:We demonstrated remarkably enhanced 2.7 mu m emission in glass-ceramic (GC) fibers containing NaYF4: Er3+ nanocrystals with 980 nm excitation for the first time. The melt-in-tube technique is of scientific and technical significance for the fabrication of GC fibers in comparison to the conventional rod-in-tube technique. The obtained precursor fibers, in which the structure can be maintained well, exhibit no obvious element diffusion or crystallization during the fiber-drawing process. After a careful heat treatment, NaYF4 nanocrystals were controllably precipitated in the glass fiber core. Owing to the incorporation of Er3+ ions into the low phonon energy NaYF4 nanocrystals, enhanced 2.7 mu m emission was achieved from the Er3+-doped GC fibers, which was almost undetectable in precursor fibers due to the high phonon energy of the borosilicate glass fiber matrix. Moreover, the 2.7 mm emission lifetime was obtained due to the excellent emission properties of Er3+ in the GC fibers. The transmission loss values of precursor fibers and GC fibers at 1310 nm were measured to be 7.44 dB m(-1) and 11.81 dB m(-1), respectively. In addition, a theoretical simulation based on the rate equations and propagation equations was performed to evaluate the possibility of 2.7 mu m laser output. The excellent optical properties endow the GC fibers with potential applications for mid-infrared fiber lasers.

Mid-infrared emissions of Dy3+ doped Ga-As-S chalcogenide glasses and fibers and their potential for a 42 μm fiber laser

Mid-infrared emissions of Dy 3+ doped Ga-As-S chalcogenide glasses and fibers and their potential for a 4.2 μm fiber laser

Optical Properties and Local Structure of Dy3+-doped Chalcogenide and Chalcohalide Glasses

Dy 3+ -doped chalcohalide glass for 1.3-μm optical fiber amplifiers

Theoretical Modeling of 4.3 Μm Mid-Infrared Lasing in Dy3+-Doped Chalcogenide Fiber Lasers

Synthesis and Spectroscopy of High Concentration Dysprosium Doped Ges2-Ga2s3-Cdi2 Chalcohalide Glasses and Fiber Fabrication

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Dy3+-doped Ge–Ga–Sb–Se glasses for 1.3 μm optical fiber amplifiers

Near- and mid-infrared emissions of Dy3+ doped and Dy 3+/Tm3+co-doped lead cesium iodide modified chalcohalide glasses

Dy 3+ -Doped Selenide Glasses for 1.3-Μm Optical Fiber Amplifiers

Mid-Infrared Single-Mode Ge-As-S Fiber for High Power Laser Delivery

Intense 2.7 μm emission of Er3+/Pr3+ doped Ga5Ge20Sb10S65 chalcogenide glass

Spectroscopic properties and Judd-Ofelt analysis of Dy3+-doped and Dy3+, Tm3+-codped Ge-In-S chalcogenide glasses

Progress in rare-earth-doped mid-infrared fiber lasers

Intense Near-Infrared and Midinfrared Luminescence from the Dy3+-doped GeSe2–Ga2Se3–MI (M=K, Cs, Ag) Chalcohalide Glasses at 1.32, 1.73, and 2.67 Μm

Efficient and Broadband Emission in Dy3+-Doped Glass-Ceramic Fibers for Tunable Yellow Fiber Laser

Fabrication of mid-IR As-Se chalcogenide glass and fiber with low scattering loss

Low-loss Ge-As-Se-Te Fiber for High-Intensity CO2 Laser Delivery

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

Host dependence of spectroscopic properties of Dy3+- Doped and Dy3+, Tm3+-codped Ge-Ga-S-CdI2 chalcohalide glasses

Direct femtosecond laser writing fiber Bragg gratings in double-D cladding chalcogenide glass infrared fibers