Abstract:Lead-free solder alloys typically comprise β-Sn, known for its anisotropy. Our experiments revealed that under standard solidification conditions (Room temperature cooling), characterized by an angular distribution spanning 20–60°, β-Sn crystals exhibited minimal nucleation and lacked a distinct optimal orientation. However, when a temperature gradient of 295 K/cm was applied during the solidification of β-Sn crystals, a conspicuous selective orientation emerged. This orientation favored the growth along the [110] grain axis. However, with the further increase in temperature gradient, a significant transition occurs in the growth mechanism of Sn crystals: multiple nucleation centers emerge, leading to dendritic crystal growth. With the further increase in temperature gradient, a significant transformation occurs in the growth mechanism of Sn crystals: multiple-nucleation centers emerge, leading to dendritic crystal growth, and subsequently transitioning towards equiaxed growth. Consequently, the expansion of the temperature gradient results in an increase in undercooling, triggering a series of changes in crystal growth patterns: the solidification front transitions from planar to dendritic growth and further to equiaxed growth. This is because, with the increasing prominence of undercooling, the transport of solutes from the tin solution to the tin melt diminishes. The atomic saturation in the tin melt decreases, causing a decline in the grain growth rate and promoting the formation of equiaxed crystals.

Separation mechanism of bulk Si from Si–Sn melt via upwards directional solidification based on the density difference

Evolution Mechanism of Solid–Liquid Interface of Large-Sized Bulk Polysilicon via Si–Sn Solution Growth

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Numerical Simulation of Directional Solidification Process for the Polycrystalline Silicon Ingot

Enhanced separation of bulk silicon from Si-Sn melt via electromagnetic directional solidification

Experimental Characterization and First-Principles Calculations of Zn Segregation at the Β″-Mg5al2si4/al Interfaces in Al-Mg-Si Alloys

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Experimental and Numerical Study on the Formation of Channel Segregation in Pb-Sn Alloy Ingot

Solidification behavior of Sn crystals − Under different temperature gradients

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy During Annealing

Numerical Simulation on A-segregates During Horizontal Solidification in Pb-Sn Alloy

Solidification Interface Morphology Pattern in the Undercooled Co–24.0at.% Sn Eutectic Melt

Critical splitting of the solidifying interface-geometrical model of spacing selection during directional solidification of lamellar eutectics

Effect of Si on the Solidification Segregation Behavior of a New Ni–Co‐Based Superalloy

Influence of Initial Solid–liquid Interface Morphology on Further Microstructure Evolution During Directional Solidification

Simulation of a-segregate formation in binary alloys

Microsegregation of Peritectic Systems in a Temperature Gradient: Analysis in Directionally Solidified Sn–36at.%Ni Peritectic Alloy

Solidification Process and Microstructure Evolution of Bulk Undercooled Co–Sn Alloys

Exploring the Local Structure of Molten Al-Zr-Y(Si) Alloys Using Ab Initio Molecular Dynamics

Influence of Solutal Convection on Solute Distribution of Melt During Preparation of Directionally Solidified Sn–36 At.%ni Peritectic Alloy

Microstructure Evolution in Undercooled Ni-Si Melt