Abstract:Purpose - The motivation for this work is to establish a model that not only includes the main factors resulting in macrosegregation but also retains simplicity and consistency for the sake of potential application in casting practice.Design/methodology/approach - A mathematical model for the numerical simulation of thermosolutal convection and macrosegregation in the solidification of multicomponent alloys is developed, in which the coupled macroscopic mass, momentum, energy and species conservation equations are solved. The conservation equations are discretized by using the control volume-based finite difference method, in which an up-wind scheme is adopted to deal with the convection term. The alternative direction implicit procedure and a line-by-line solver, based on the tri-diagonal matrix algorithm, are employed to iteratively solve the algebraic equations. The velocity-pressure coupling is handled by using the SIMPLE algorithm.Findings - Based on the present study, the liquid flow near the dendritic front is believed to play an important role in large-scale transport of the solute species. The numerical or experimental results in the literatures on the formation of channel segregation, especially those about the location of the initial flow as well as the morphology of the liquidus front, are well supported by the present investigation.Research limitations/implications - The modelling is limited to dealing with the thermosolutal convection of two-dimensional cases. More complicated phenomena (e.g. crystal movement) and 3D geometry should be considered in future research.Practical implications - The present model can be used to analyze the effects of process parameters on macrosegregation and, with further development, could be applied as a useful tool in casting practice.Originality/value - The numerical simulation demonstrates the capability of the model to simulate the thermosolutal convection and macrosegregation in alloy solidification. It also shows, that the present model has good application potential in the prediction and control of channel segregation.

Numerical Simulation on A-segregates During Horizontal Solidification in Pb-Sn Alloy

Simulation of a-segregate formation in binary alloys

A Response to Numerical Benchmark for Solidification of Binary Alloys: Macro-Segregation with Thermo-Solutal Convection

Numerical Simulation of Macrosegregation During Solidification of Binary Alloys

Three-Dimensional Modeling of Segregation Behavior during Solidification of a Sn-6 wt.% Pb Alloy

Numerical Simulation of Macro-Segregation Formation During Solidification Process of Immiscible Alloys

Numerical Simulation on Channel Segregation in Vertically Unidirectional Solidification Process

Numerical Simulation of Channel Segregation in Directional Solidification

Numerical Simulation of Macrosegregation Caused by Thermal–Solutal Convection and Solidification Shrinkage Using ALE Model

Experimental and Numerical Study on the Formation of Channel Segregation in Pb-Sn Alloy Ingot

Numerical Simulation of Solute Segregation Patterns for a Binary Alloy Using Phase-Field Approach

Numerical Simulation of Recalescence of 3-Dimensional Isothermal Solidification for Binary Alloy Using Phase-Field Approach

Numerical research on the effects of grain structure on lead concentration distribution in Sn-3 wt.%Pb benchmark experiment using two-phase solidification model coupled with cellular automaton method

Numerical Simulation of Macro-Segregation with Equiaxed Grains Movement

Numerical Simulations of Macrosegregation: A Comparison Between Orthogonal Grids and Non-Orthogonal Grids

Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

Modelling Of The Thermosolutal Convection And Macrosegregation In The Solidification Of An Fe-C Binary Alloy

Three-dimensional simulation of thermosolutal convection and macrosegregation in steel ingots

Numerical simulation of macro-segregation in steel ingot during solidification

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Numerical simulation of freckle formation in directional solidification of nickel-based superalloy