Abstract:To accurately simulate the formation of macrosegregation, a major defect commonly encountered in large ingots, solidification researchers have developed various mathematical models and conducted corresponding steel ingot dissection experiments for validation. A multicomponent and multiphase solidification model was utilized to predict macrosegregation of steel ingots in this research. The model described the multi-phase flow phenomenon during solidification, with the feature of strong coupling among mass, momentum, energy, and species conservation equations. Impact factors as thermo-solutal buoyancy flow, grains sedimentation, and shrinkage-induced flow on the macroscopic scale were taken into consideration. Additionally, the interfacial concentration constraint relations were derived to close the model by solving the solidification paths in the multicomponent alloy system. A finite-volume method was employed to solve the governing equations of the model. In particular, a multi-phase SIMPLEC (semi-implicit method for pressure-linked equations-consistent) algorithm was utilized to solve the velocity-pressure coupling for the specific multiphase flow system. Finally, the model was applied to simulate the macrosegregation in a 535 tons steel ingot. The simulated results were compared with the experimental results and the predictions reproduced the classical macrosegregation patterns. Good agreement is shown generally in quantitative comparisons between experimental results and numerical predictions of carbon, chromium and molybdenum concentration. It is demonstrated that the multicomponent-multiphase solidification model can well predict macrosegregation in steel ingots and help optimize the ingot production process.

Numerical Simulations of Macrosegregation: A Comparison Between Orthogonal Grids and Non-Orthogonal Grids

Numerical Simulation of Macrosegregation with Multiphase Model and Non‐Orthogonal Grids

Numerical Simulation of Macrosegregation During Solidification of Binary Alloys

Numerical Simulation of Macrosegregation in Steel Ingots Using A Two-Phase Model

Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model

Researches on Macrosegregation Numerical Simulation during Cast Alloy Solidification Process

Three-dimensional simulation of thermosolutal convection and macrosegregation in steel ingots

Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model

Simulation of Macrosegregation in a 36-T Steel Ingot Using a Multiphase Model

Numerical Simulation of Macrosegregation in Cast-steel Ingot

Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot

Numerical simulation of macro-segregation in steel ingot during solidification

A Response to Numerical Benchmark for Solidification of Binary Alloys: Macro-Segregation with Thermo-Solutal Convection

Numerical Simulation of Macrosegregation During Steel Ingot Solidification Using Continuum Model

Numerical Simulation of Macro-Segregation with Equiaxed Grains Movement

Simulation of macrosegregation due to melt convection and grain sedimentation in steel ingots using a mixture model

A Finite Element Formulation for Macrosegregation During Alloy Solidification Using a Fractional Step Method and Equal-Order Elements

Numerical Simulation of Macro-Segregation Formation During Solidification Process of Immiscible Alloys

Numerical Simulation of Macrosegregation Caused by Thermal–Solutal Convection and Solidification Shrinkage Using ALE Model

Simulation of Macrosegregation in a 2.45-Ton Steel Ingot Using a Three-Phase Mixed Columnar-Equiaxed Model

Simulation of convection and macrosegregation in a large steel ingot