Abstract:A series of solidification benchmark experiments based on Sn-10wt.% Pb alloy were performed at the SIMAP Laboratory in Grenoble, France (Hachani et al., 2015) to study the effect of different types of forced convection on the as-cast structure and macrosegregation. Forced convection was achieved by using a traveling magnetic field (TMF). Four cases were investigated: without TMF; TMF in the same direction as natural convection; TMF in the opposite direction as natural convection; and TMF periodically reversed with respect to natural convection. In the current study, a three-phase mixed columnar-equiaxed solidification model was used to “reproduce” the above experiments to understand the flow effect on the as-cast structure formation. The dendrite fragmentation is regarded as the only source of equiaxed grains. Remelting/destruction of equiaxed grains in the superheated melt is considered. The continuous growth of the surviving equiaxed grains and further competition with the as-developed columnar dendrites, leading to columnar-to-equiaxed transition (CET), are included. Except for Case III (i.e., a TMF in the opposite direction as natural convection), satisfactory simulation-experiment agreements in terms of the temperature field, as-cast structure and macrosegregation are obtained for the remaining three cases. Based on the simulation results, it is found that 1) TMF plays an important role in homogenizing the temperature field and promoting the formation of equiaxed grains via fragmentation, consequently facilitating the appearance of CET; 2) TMF tends to generally intensify macrosegregation and increase the number of channel segregations; and 3) the simultaneous solidification/remelting process represents a significant species/energy transport mechanism. Ignoring the remelting of equiaxed grains would lead to an overestimate of the local temperature in the remelting zone. The reason for the mismatch between the simulation and experimental results obtained for Case III is discussed.

Experimental and Numerical Study on the Formation of Channel Segregation in Pb-Sn Alloy Ingot

Formation condition and affecting factors of channel segregation in unidirectional solidified ingot

Study Of The Channel Segregation Using A Two-Phase Columnar Solidification Model

Numerical Simulation of Channel Segregation in Directional Solidification

Numerical Simulation on A-segregates During Horizontal Solidification in Pb-Sn Alloy

Simulation of a-segregate formation in binary alloys

Three-Dimensional Modeling of Segregation Behavior during Solidification of a Sn-6 wt.% Pb Alloy

Macrosegregation and channel segregation formation of faceted mushy zone in solidification of Sn–Ni hypereutectic alloy in a temperature gradient

Simulation of channel segregation using a two-phase columnar solidification model – Part I: Model description and verification

A Response to Numerical Benchmark for Solidification of Binary Alloys: Macro-Segregation with Thermo-Solutal Convection

How Channel Segregates Originates: The Flow of Accumulated Impurity Clusters in Solidifying Steels

Characteristics, Mechanism and Criterion of Channel Segregation in NbTi Alloy via Numerical Simulations and Experimental Characterizations

Innate character and theory model about channel segregation in a sand mold steel ingot

Separation mechanism of bulk Si from Si–Sn melt via upwards directional solidification based on the density difference

Numerical Simulation of A-Segregation Evolution in a 55-Ton Ingot Using Four-Phase Solidification Model

Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

A Full View of the Segregation Evolution in Al–Bi Immiscible Alloy

Numerical Simulation on Channel Segregation in Vertically Unidirectional Solidification Process

Experimental and Numerical Study of Macrosegregation in a 160 Steel Ingot

Study on the positive segregation in columnar-to-equiaxed transition zone

Centerline Segregation in Continuous Casting Billets