Abstract:LiCoO2 (LCO) is a leading cathode material of lithium-ion batteries in consumer electronics. However, practical applications of high-voltage fast charging are hampered by unstable interfacial structures and unfavorable phase transitions arising from the superimposed high-flux Li+ diffusion of LCO during deep de-lithiation. Here, we report a universal cathode interface engineering strategy of stabilizing 4.45 V commercial LCO by surface fluorination (F-LCO) towards fast-charging long-life cyclability at a high voltage of 4.6 V. It is experimentally observed that the resulting near-surface structure with a similar to 1 nm ultrathin dense LiF covering layer and a 10-20 nm gradient fluorination lattice, together with a trace amount of phosphates, provides extraordinary stabilization to the surface lattice oxygen. F-LCO achieves a record capacity retention of 92% after 1000 cycles at 3C, far outperforming the commercial LCO (31%) and reported 4.6 V LCOs. Further, it is theoretically revealed that the antibonding orbital electron transfer in Co-F bonding greatly inhibits cobalt migration as the de-lithiation approaches 4.6 V. We unravel that the reconstructed high-energy barrier F-rich interface with enhanced charge transfer capability ultimately prevents high-valent oxygen species (On-, 0 < n < 2) from migrating along vacancies and evolving into oxygen to generate interfacial side reactions. Our pouch-type full cells of graphite||F-LCO offer superior high voltage (4.5 V) cyclability without capacity fading over 1100 cycles at a fast-charging rate of 5C. Therefore, this strategy of cathode interface fluorination provides new insights into the commercial realization of high-voltage fast-charging LCOs.

In Situ -Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO 2

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2

In-situ reconstructed surface/inner-structure synergistic design enabling 4.6 V LiCoO 2 cathode for all-solid-state thin-film battery

Kinetics Enhancement of High‐Voltage LCO via In‐Situ Formed Cyanide‐Rich Polymer Interfaces

Designing Advanced In Situ Electrode/Electrolyte Interphases for Wide Temperature Operation of 4.5 V Li||LiCoO<sub>2</sub> Batteries

Outside‐In Nanostructure Fabricated on LiCoO2 Surface for High‐Voltage Lithium‐Ion Batteries

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Ultrahigh‐voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification

Electrolyte regulating and interface engineering for high voltage LiCoO2 lithium metal batteries

An in Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Ultrahigh-Voltage LiCoO 2 at 4.7 V by Interface Stabilization and Band Structure Modification.

Advancing to 4.6 V Review and Prospect in Developing High‐Energy‐Density LiCoO 2 Cathode for Lithium‐Ion Batteries

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

High-Voltage and High-Temperature LiCoO 2 Operation via the Electrolyte Additive of Electron-Defect Boron Compounds