Abstract:This study introduces a novel functional polyurethane (PU) coating applied to lithium‐rich oxide (LRO) particle surfaces, aiming to enhance their electrochemical performance. The PU coating effectively stabilizes the LRO's crystal field energy through coordination bonds with Mn4+. This leads to a marked reduction in irreversible oxygen release and Mn migration, thus significantly improving the cyclic stability of the electrode material. High‐energy‐density and cost‐effective lithium‐rich oxides (LRO) are considered as the promising cathode materials for the next‐generation lithium‐ion batteries . Nevertheless, the elevated cut‐off voltage and the complex interface interactions have presented significant challenges that can lead to material degradation. Specifically, the inevitable release of lattice oxygen and the highly reactive interface‐driven irreversible migration of transition metal (TM) ions in LRO make the construction of a robust interface extremely important. Herein, an effective and efficient coating approach is applied to stabilize the interface structure of LRO by introducing a coordination bond between the strong ligand of polyurethane (PU) and the surface of LRO particles. This functional coating stabilizes the crystal field stabilization energies of LRO by acting as a strong ligand in spectrochemistry to form a coordination bond with Mn4+ in Li2MnO3 at high voltage. Consequently, irreversible oxygen release and TM ions migration are greatly inhibited. Overall, the LRO‐PU cathode exhibits superior electrochemical cyclability with a retention of 80.0% at 1C after 300 cycles and enhanced rate capability with a retention of 80.9% at 0.1C after rate cycles, marking a significant step toward commercial implementation.

Kinetics Enhancement of High‐Voltage LCO via In‐Situ Formed Cyanide‐Rich Polymer Interfaces

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2

Lattice‐Matched Interfacial Modulation Based on Olivine Enamel‐Like Front‐Face Fabrication for High‐Voltage LiCoO2

Preventing the Distortion of CoO6 Octahedra of LiCoO2 at High-Voltage Operation of Lithium-Ion Battery: An Organic Surface Reinforcement

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

An in Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Interface Engineering via Constructing Enhanced Ligand Enables Highly Stable Li‐Rich Layered Oxide Cathode

In-situ reconstructed surface/inner-structure synergistic design enabling 4.6 V LiCoO 2 cathode for all-solid-state thin-film battery