Abstract:Silica particles tend to be aggregate and difficult to be dispersed homogeneously in organic coatings or polymer nanocomposites because of the large number of -OH groups in the surface, and this remains an obstacle to further applications. Surface modification was carried out to improve silica hydrophobic ability in order to afford materials with anticipated functional properties. Improving hydrophobic ability can be achieved by using silylation agent Dimethoxydimethylsilane (DMDMS). Synthesis of hydrophobic silica TEOS-DMDMS was conducted by sol-gel process. TEOS-DMDMS was dissolved into ethanol solution with molar ratio of TEOS:DMDMS:EtOH 1:0.5:50 by using magnetic stirrer. Various acid catalysts (CH3COOH, H2C2O4, HNO3, and H2SO4) were added to the ethanol solvent until they reached the same pHs of 3.5. The TEOS-DMDMS sols were used for the surface modification of the glass slide by dip-coating method and then were calcined at temperatures of 300°C, 500°C and 600°C. The hydrophobicity of thin silica thin layers was tested by measuring water contact angle (WCA) and silica xerogels were investigated by TGA and FTIR to determine the thermal properties and characteristics of each functional groups. The WCA values of the uncalcined silica, calcined at 300°C and calcined at 500°C were in the range of 85.4-89.6°, 90.5-92.6°, and 50.4-59.7° respectively. The results of the TGA analysis showed that the TEOS-DMDMS silica began to lose its hydrophobicity starting from temperature of 325°C. The FTIR spectra showed no significant difference in functional groups of the sample prepared from all acid catalysts.

Reducing the thermal hazard of hydrophobic silica aerogels by using dimethyldichlorosilane as modifier

Enhancing thermal safety of hydrophobic silica aerogels by incorporating sodium dodecyl sulfate intercalated layered double hydroxides

Experimental Investigation of the Combustion Characteristics and Thermal Hazards of Methylsilyl-Modified Silica Aerogels

Surface chemistry, skeleton structure and thermal safety of methylsilyl modified silica aerogels by heat treatment in an argon atmosphere

Improving the flame retardance of hydrophobic silica aerogels through a facile post-doping of magnesium hydroxide

In-Situ Synthesis of Layered Double Hydroxide/Silica Aerogel Composite and Its Thermal Safety Characteristics

Nanoporous Silica–Chitosan Aerogels for Thermal Insulation and Flame Retardancy

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Synthesis of hydrophobic silica aerogel and its composite using functional precursor

Regulating the hydrophobicity and pore structure of silica aerogel for thermal insulation under humid and high temperature conditions

Synthesis and characterization of hydrophobic silica prepared by different acid catalysts

A three-dimensional network modifier (dimethyldiethoxysilane) makes ZrO 2 -SiO 2 aerogel with excellent thermal insulation performance and high-temperature stability

Study on Silica Aerogel Modified by Trimethylchlorosilane

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

Flame retardant, heat insulating and hydrophobic chitosan-derived aerogels for the clean-up of hazardous chemicals

Preparation and properties of thermal insulation coating based on silica aerogel

Effect of organic hydrophobic groups on the pore structure and thermal properties of waterglass-based silica xerogels

Flexible and super hydrophobic polymethylsilsesquioxane based silica aerogel for organic solvent adsorption via ambient pressure drying technique

Alumina-Doped Silica Aerogels for High-Temperature Thermal Insulation