Abstract:The properties of silica aerogels, and the ability to prepare them by ambient pressure drying, hinge on their chemical surface modification. Until now, quantitative analysis of the surface chemistry has not been possible by state-of-the-art analytical methods. Here, we determine the surface chemistry of six archetypal, ambient pressure dried, hydrophobic silica aerogels and open-porous foams with quantitative 1H, 13C, and 29Si and 1H–29Si heteronuclear solid-state NMR spectroscopy. The quality of the external calibration, the validation by elemental analysis, and the consistency among the 1H, 13C, and 29Si MAS NMR data enable us to robustly quantify the surface chemistry of these classical silica materials. Four aerogels were derived from tetraethoxysilane (TEOS), polyethoxydisiloxane (PEDS), or waterglass precursors and hydrophobized with trimethylsilyl (TMS) groups through immersion in hexamethyldisilazane (HMDZ) in heptane, trimethylchlorosilane (TMCS) in heptane, or hexamethyldisiloxane (HMDSO) in ethanol. The resulting aerogels display remarkably similar chemistries despite their very different precursors (alkoxides, waterglass), hydrophobization agents (HMDZ, TMCS, HMDSO), and gelation and hydrophobization solvents (water, ethanol, heptane). The TMS content is nearly the same (22–27 wt %), the ethoxy content is low (<4 wt %), and the silica speciation displays a narrow range for all four aerogels. The 1H–29Si heteronuclear correlation spectra provide unambiguous evidence for the grafting of the TMS groups on the silica surfaces. Remarkably, the NMR data enable the prediction of the silica particle size to within 1 to 2 nm of that derived by TEM analysis. Two additional, inherently hydrophobic, ambient pressure dried, open-porous silica foams were synthesized from methyltrimethoxysilane (MTMS) and from a MTMS–dimethyldimethoxysilane (DMDMS) mixture. The reduction in the number of bridging oxygens per Si atom, from 3.76 to 3.90 for TEOS, PEDS, or waterglass based aerogels, to 2.86 for the MTMS based open-porous foam, and to 2.48 for the MTMS–DMDMS derived open-porous foam, results in a brittle-to-superflexible transition. Our results highlight the importance of the chemical treatment of the wet gels (hydrophobization and solvent exchange) on the final surface chemistry of silica aerogels.

Study on Silica Aerogel Modified by Trimethylchlorosilane

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel

Silica aerogels formed from soluble silicates and methyl trimethoxysilane (MTMS) using CO2 gas as a gelation agent

Preparation of high-strength silica aerogels by two-step surface modification via ambient pressure drying

Surface Chemistry of Hydrophobic Silica Aerogels

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

Rapid synthesis of sodium silicate based hydrophobic silica aerogel granules with large surface area

Preparation of superhydrophobic and flexible polysiloxane aerogel

Synthesis of Al2O3-SiO2 aerogels with low thermal conductivity and high strength by methyltriethoxysilane as a silica precursor

Preparation of Hydrophobic Silica Aerogels from Industrial Water Glass

Monolithic chitosan-silica composite aerogel with comprehensive performances prepared by SBG-FD method

Preparation and Characterization of Hydrophobic Silica Aerogel by Ambient Pressure Drying Method

Synthesis and properties of superhydrophobic methylsilsesquioxane chitosan-silica hybrid aerogels

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Effect of different trimethyl silylating agents on the hydrophobic and physical properties of silica aerogels

Elastic Silica Aerogel Using Methyltrimethoxysilane Precusor Via Ambient Pressure Drying

Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process

Preparation of Silica Aerogels Monoliths from Hydrophobic Silica Gels and Pluronic10R5 via Sol–Gel Process

Regulating the hydrophobicity and pore structure of silica aerogel for thermal insulation under humid and high temperature conditions

Surface chemistry, skeleton structure and thermal safety of methylsilyl modified silica aerogels by heat treatment in an argon atmosphere