Abstract:All-inorganic wide-bandgap perovskite CsPbI2Br has attracted much attention because of its inherent thermal stability and ideal bandgap for the front subcell of tandem solar cells (TSCs). However, the low power conversion efficiency (PCE) and poor moisture stability of CsPbI2Br still restrict its future commercialization. Herein, zirconium tetrachloride (ZrCl4) was doped into CsPbI2Br films to modulate the crystal growth and improve the film quality. The partial substitution of the B-site Pb2+ of CsPbI2Br with Zr4+ suppresses the unwanted phase conversion from the crystallized black α-phase to the δ-phase, resulting in improved phase stability. Consequently, the humidity and thermal stability of the film are greatly improved. Additionally, the incorporation of ZrCl4 suppresses nonradiative recombination and forms a matched energy-level alignment with the hole-transport layer (Spiro-OMeTAD). Benefiting from these features, the ZrCl4-doped CsPbI2Br perovskite solar cell (PSC) shows an outstanding efficiency of 16.60% with a high open-circuit voltage of 1.29 V. The unencapsulated devices simultaneously show excellent humidity and thermal stability, retaining over 91% of PCEinitial after 1000 h of aging in ambient air conditions and 92% PCEinitial after 500 h of continuous heating at 85 °C in a nitrogen environment, respectively. Furthermore, ZrCl4-doped CsPbI2Br was employed as the front subcell of perovskite/organic TSCs and achieved a remarkable PCE of 19.42%, showing great potential for highly efficient and stable TSCs.

Enhancing the performance of CsPbIBr2 solar cells through zinc halides doping

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

High-Performance CsPbI2Br Perovskite Solar Cells with Zinc and Manganese Doping

Over 1 Μm Electron-Hole Diffusion Lengths in CsPbI2Br for High Efficient Solar Cells

Improved Photovoltaic Performance of CsPbI2Br Perovskite Films Via Bivalent Metal Chloride Doping

Zinc ion functional doping for all-inorganic planar CsPbIBr 2 perovskite solar cells with efficiency over 10.5%

Zirconium Doping to Enable High-Efficiency and Stable CsPbI2Br All-Inorganic Perovskite Solar Cells.

Zinc and Acetate Co-doping for Stable Carbon-Based CsPbIBr2 Solar Cells with Efficiency over 10.6%

Suppressing intrinsic self-doping of CsPbIBr<sub>2</sub>films for high-performance all-inorganic, carbon-based perovskite solar cells

Zinc and Acetate Co-doping for Stable Carbon-Based CsPbIBr 2 Solar Cells with Efficiency over 10.6%

Suppressing Intrinsic Self-Doping Of Cspbibr(2)Films For High-Performance All-Inorganic, Carbon-Based Perovskite Solar Cells

Pb-Reduced CsPb0.9Zn0.1I2Br Thin Films for Efficient Perovskite Solar Cells

Enhancing the Optical, Morphological and Electronic Properties of the Solution-Processed CsPbIBr2 Films by Li Doping for Efficient Carbon-Based Perovskite Solar Cells

Monovalent Copper Cation Doping Enables High-Performance CsPbIBr2-Based All-Inorganic Perovskite Solar Cells

Defect Passivation of CsPbI2Br Perovskites Through Zn(II) Doping: Toward Efficient and Stable Solar Cells

Improving the Stability and Optoelectronic Properties of All Inorganic Less-Pb Perovskites by B-Site Doping for High-Performance Inorganic Perovskite Solar Cells

Improving the Stability and Optoelectronic Properties of All Inorganic Less‐Pb Perovskites by B‐Site Doping for High‐Performance Inorganic Perovskite Solar Cells

Mn Doping of CsPbI3 Film Towards High-Efficiency Solar Cell

CsPbBr3 Seeds Improve Crystallization and Energy Level Alignment for Highly Efficient CsPbI3 Perovskite Solar Cells

Promoting the Efficiency and Stability of CsPbIBr2-Based All-Inorganic Perovskite Solar Cells Through a Functional Cu2+ Doping Strategy.

Synergistic Effect of Surface p-Doping and Passivation Improves the Efficiency, Stability, and Reduces Lead Leakage in All-Inorganic CsPbIBr<sub>2</sub>-Based Perovskite Solar Cells