Abstract:All-inorganic cesium lead iodine perovskite materials (CsPbI3) have been widely studied and applied to PSCs because of their excellent thermo-chemical stability and suitable bandgap. However, CsPbI3 still faces the issue of phase transitions under humid conditions. In this study, cesium trimethylacetate (CsTa) organic cesium salt is employed as an additive in the CsPbI2.84Br0.16 film. The results show that CsTa can have multifunctional effects on CsPbI2.84Br0.16 perovskite stability. The steric hindrance blocking effect of Ta- anions can efficiently prevent the tilt of the [PbI6](4-) octahedrons to inhibit the phase transition process from the corner-shared perovskite to the edge-shared non-perovskite structure. The Ta- groups are firmly located at the X site of the perovskite structure, leading to an increase in the energy barrier for X-site vacancy generation (from 0.816 eV to 1.217 eV), which slows the phase transition process induced by lattice disorder. Meanwhile, the decrease in crystal grain size after adding CsTa is beneficial for perovskite phase stability due to the decreased surface Gibbs free energy of CsPbI2.84Br0.16 crystals. In addition, the reduced defect density brought about by the improved crystal quality is also favorable for increasing the energy barrier for the phase transition from the perovskite phase to the delta phase. Finally, a champion PCE of 16.59% can be achieved from the HPbI3-prepared PSCs with adding CsTa, which maintain 80.88% of the initial performance after more than 1200 hours in air (RH: similar to 20%). Meanwhile, both 0.1-CsTa and 0.2-CsTa PbI2-prepared PSCs deliver excellent stability and maintain above 80% of the initial PCE after nearly 2000 hours. Impressively, under a relatively high thermal/moisture (temperature: 80 degrees C/RH: similar to 80%) environment, the 0.2-CsTa devices can still retain 87.41% of the initial performance after 500 hours of storage.

Synergistic effect of alkali metal doping and thiocyanate passivation in CsPbBr3 for HTM-free all-inorganic perovskite solar cells

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Significant performance enhancement of all‐inorganic CsPbBr 3 perovskite solar cells enabled by Nb‐doped SnO 2 as effective electron transport layer

Monovalent Copper Cation Doping Enables High-Performance CsPbIBr2-Based All-Inorganic Perovskite Solar Cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Promoting the Efficiency and Stability of CsPbIBr2-Based All-Inorganic Perovskite Solar Cells Through a Functional Cu2+ Doping Strategy.

Natrium Doping Pushes the Efficiency of Carbon-Based CsPbI3 Perovskite Solar Cells to 10.7

Enhanced Efficiency and Stability of All‐Inorganic CsPbI2Br Perovskite Solar Cells by Organic and Ionic Mixed Passivation

High-performance carbon-based all-inorganic CsPbI2Br perovskite solar cells via ethylammonium iodide and phenethylammonium iodide synergistic passivation

One‐Source Strategy Boosting Dopant‐Free Hole Transporting Layers for Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells

Dual-functional metal (IIB) diethyldithocarbamate salts passivation enabled high-efficiency and stable carbon-based CsPbIBr2 all-inorganic perovskite solar cells

Fluorinated organic ammonium salt passivation for high-efficiency and stable inverted CsPbI2Br perovskite solar cells

Enhanced efficiency and long-term stability of all inorganic CsPbBr 3 perovskite solar cells via regulation of charge separation and extraction by band engineered-Co 3 O 4 nanocrystals as a hole transport material layer

Indium-Doped CsPbI2.5Br0.5 with a Tunable Band Structure and Improved Crystallinity for Thermo-Stable All-Inorganic Perovskite Solar Cells

High-Efficiency And Thermal/Moisture Stable Cspbi2.84br0.16 Inorganic Perovskite Solar Cells Enabled By A Multifunctional Cesium Trimethylacetate Organic Additive

Enhanced efficiency and long-term stability of all inorganic CsPbBr3 perovskite solar cells via regulation of charge separation and extraction by band engineered-Co3O4 nanocrystals as a hole transport material layer

Synchronous Modulation of Energy Level Gradient and Defects for High‐Efficiency HTL‐Free Carbon‐Based All‐Inorganic Perovskite Solar Cells

Synergistic Effects of Multifunctional Lanthanides Doped CsPbBrCl 2 Quantum Dots for Efficient and Stable MAPbI 3 Perovskite Solar Cells

Effects of passivated molecular side group on inverted inorganic CsPbI2Br perovskite solar cells