Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted tremendous attentions in the photovoltaic field these days in view of their outstanding stability, especially thermal stability. However, the bromide-rich perovskite, such as CsPbBr3, always suffer from a low phase-purity and poor morphology synthesized by traditional two-step deposition route. Herein, we demonstrate a facile multistep spin-coating strategy to fabricate high-quality CsPbBr3 films on the low-temperature processed compact TiO2 (c-TiO2) electron transport layer (ETL) of the carbon-based PSCs. As-prepared films exhibit more homogeneous with higher CsPbBr3-phase purity and larger average grain sizes up to 1 mu m, compared to those prepared through traditional two-step deposition process. The champion power conversion efficiency (PCE) of the planar CsPbBr3 PSC is boosted from 7.05% to 8.12%, getting an increase by 15.2%, due to the increased crystallinity and light-harvesting ability as well as reduced trap states of the CsPbBr3 film. To further enhance the device performance, a SnO2 thin layer with much higher carrier mobility than TiO2 is introduced to passivate the c-TiO2 ETL. It is found that the SnO2 layer can not only improve the surface morphology of the ETL, but also reduce the current shunting pathways in the c-TiO2. The TiO2/SnO2 bilayered ETL possesses a superior electron extraction capability, beneficial to the charge transport and suppression of the interfacial trap-assisted recombination. The best-performing TiO2/SnO2-based CsPbBr3 PSC delivers an excellent fill factor of 0.817 and a high PCE of 8.79%, which is the highest efficiency for planar CsPbBr3 PSCs reported to date. More importantly, the unencapsulated all-inorganic PSCs show a promising humidity and thermal stability with no decline in efficiency when stored in ambient air at room temperature (25 degrees C) for over 1000 h and 60 degrees C for one month, respectively. Our work pave the ways for practical applications of cost-effective, highly efficient and stable all-inorganic PSCs.

Significant performance enhancement of all‐inorganic CsPbBr 3 perovskite solar cells enabled by Nb‐doped SnO 2 as effective electron transport layer

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Enhanced Performance of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells with Room-Temperature Sputtered Nb2O5 Electron Transport Layer

Efficient carbon-based planar CsPbBr<sub>3</sub> perovskite solar cells with Li-doped amorphous Nb<sub>2</sub>O<sub>5</sub> layer

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

n-type absorber by Cd2+ doping achieves high-performance carbon-based CsPbIBr2 perovskite solar cells

Enhanced Electron Extraction Using Neodymium Ions Doped TiO2 for All-Inorganic CsPbBr3 Perovskite Solar Cells

Enhanced efficiency of CsPbIBr2 perovskite solar cells through dual-layer ETL engineering

Boosting the Efficiency of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells by a Modified Multistep Spin-Coating Technique and Interface Engineering

Synergistic effect of alkali metal doping and thiocyanate passivation in CsPbBr3 for HTM-free all-inorganic perovskite solar cells

All-Inorganic Perovskite Solar Cells with Tetrabutylammonium Acetate as the Buffer Layer between the SnO 2 Electron Transport Film and CsPbI 3

Stable and highly efficient all-inorganic CsPbBr3 perovskite solar cells by interface engineering with NiO NCs modification

Doping Electron Transporting Layer: An Effective Method to Enhance <i>J</i><sub>SC</sub> of All-Inorganic Perovskite Solar Cells

Synergistic Effect of Surface p-Doping and Passivation Improves the Efficiency, Stability, and Reduces Lead Leakage in All-Inorganic CsPbIBr<sub>2</sub>-Based Perovskite Solar Cells

High‐Efficiency Carbon‐Based CsPbIBr 2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk‐Heterojunction Layer

Boosting the performance of low-temperature processed CsPbI2Br planar perovskite solar cells by interface engineering

Enhanced efficiency and long-term stability of all inorganic CsPbBr<sub>3</sub> perovskite solar cells via regulation of charge separation and extraction by band engineered-Co<sub>3</sub>O<sub>4</sub> nanocrystals as a hole transport material layer

Light Harvesting and Carrier Transfer Enhancement of All-Inorganic CsPbBr3 Perovskite Solar Cells by Al-doped ZnO Nanorod Arrays

Improvement of Nanopore Structure SnO2 Electron-Transport Layer for Carbon-Based CsPbIBr2 Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

Improved Photovoltaic Performance of CsPbI2Br Perovskite Films Via Bivalent Metal Chloride Doping